User manual PHILIPS LUCEO M6651

[. . . ] Always there to help you Register your product and get support at www. philips. com/support Question?Contact Philips M660 M665 Extended user documentation Contents 1 Important safety instructions 2 Your phone 3 4 4 5 6 What is in the box Overview of the phone Overview of the base station Search a record Call from the phonebook Access the phonebook during a call Add a record Edit a record Delete a record Delete all records 16 16 16 17 17 17 17 18 18 18 18 18 19 19 20 20 20 20 20 20 20 21 21 22 22 23 23 23 23 23 23 25 25 25 26 26 26 26 26 1 8 Call log 3 Get started 7 Connect the base station 7 Install the handset 7 Configure your phone (country dependent) 8 Change the remote access PIN code (for M665) 9 Charge the handset 9 Check the battery level 9 What is standby mode? 9 Display icons 9 Check the signal strength 10 Switch the handset on or off 10 11 11 11 11 12 12 12 13 13 13 Call list type View the call records Save a call record to the phonebook Return a call Delete a call record Delete all call records 9 Redial list View the redial records Redial a call Save a redial record to the phonebook Access the redial list during a call Delete a redial record Delete all redial records 4 Calls 10 Phone settings Make a call Answer a call End a call Adjust the earpiece/speaker volume Mute the microphone Turn the speaker on or off 5 Intercom and conference calls Make a call to another handset Make a conference call Sound settings Eco mode ECO+ mode Name the handset Set the date and time Set the display language Auto answer Activate/Deactivate auto hang up Base backlight 11 Alarm clock 6 Text and numbers 15 Enter text and numbers 15 Switch between uppercase and lowercase 15 16 16 Set the alarm Turn off the alarm 12 Telephone answering machine 7 Phonebook View the phonebook Turn the answering machine on or off Family notes Set the answering machine language Set the answer mode EN Announcements 27 Incoming messages 27 Set the ring delay 28 Remote access 28 13 Services 30 Call list type 30 Auto conference 30 Call barring 30 Blacklist 31 Network type 31 Auto prefix 32 Select the recall duration 32 Dial mode 32 Auto clock 33 Register additional handsets 33 Unregister the handsets 33 Restore default settings 33 34 14 Technical data 15 Notice 35 Declaration of conformity 35 Use GAP standard compliance 35 Compliance with EMF 35 Disposal of your old product and battery 35 37 39 39 41 16 Frequently asked questions 17 Appendix 18 Index Text and number input tables 2 EN 1 Important safety instructions Power requirements ? This product requires an electrical supply of 100-240 volts AC. In case of power failure, the communication can be lost. ? The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60950. Warning ?? [. . . ] Select [On]/[Off], and press MENU/OK to confirm. ECO+ is displayed in standby mode after a while. Note 1 2 3 Press MENU/OK. Select [Phone setup] > [Sounds] > [MySound], then press MENU/OK to confirm. Select a profile, then press MENU/OK to confirm. Make sure that all the handsets registered to the base Access the sound profile during a call Press REDIAL/C for once or several times to change the sound profile during a call. Eco mode The ECO mode reduces the transmission power of the handset and base station when you are on a call or when the phone is in standby mode. station are M660/M665 in order to have the ECO+ feature functioning properly. When ECO+ is activated, the standby time is reduced. This is because in ECO+ mode the base station is not transmitting any signal in standby mode; therefore the handset needs to ?listen?more frequently for signals from the base station to detect incoming calls or other requests from the base station. The time it takes for the handset to access features like call setup, call log, paging, and phonebook browsing is also delayed. The handset will not alert you to link loss in case of power loss or moving out of range. 1 2 3 Press MENU/OK. Select [Phone setup] > [Eco mode], then press MENU/OK to confirm. Select [On]/[Off], and press MENU/OK to confirm. ECO is displayed in standby mode. Note The following table shows you the current status of the handset screen with different ECO mode and ECO+ mode settings. ECO mode [Off] [Off] ECO+ mode [Off] [On] Handset icon display and are off. is displayed only after the ECO+ mode is activated during standby mode . is displayed and changed to when the ECO+ mode is activated in standby mode. ??When ECO mode is set to [On], the connection [On] [On] [Off] [On] range between the handset and the base station can be reduced. 22 EN Name the handset The name of the handset can be up to 14 characters. It is displayed on the handset screen in standby mode. 1 2 3 Press MENU/OK. Select [Phone setup] > [Auto answer], then press MENU/OK to confirm. Select [On]/[Off], then press MENU/OK to confirm. The setting is saved. 1 2 3 4 Press MENU/OK. Select [Phone setup] > [Phone name], then press MENU/OK to confirm. The setting is saved. Activate/Deactivate auto hang up You can activate the auto hang up function so that you can end a call by simply placing the handset on the base station or charge cradle. Set the date and time For information, see 'Set the date and time' in the 'Get started' section. 1 2 3 Press MENU/OK. [. . . ] The phone receives interference from the nearby electrical appliances. The phone is at a location with thick walls. Make sure the handset ringtone is turned on. The caller's information is withheld or unavailable. Note ?? [. . . ]