User manual PHILIPS LX3000D-25S

[. . . ] To change a fuse in this type of plug proceed as follows: Remove fuse cover and fuse. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. if the mains plug contains a fuse , this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. [. . . ] For example, the disc will play at the same sound level throughout the movie. Night function can also be accessed via the remote control. ­ Center Delay If the listening position is closer to the centre speaker than the front speakers, you can set the center delay time to improve the surround sound effect. options : 5ms , 3ms , 2ms , 1ms or OFF (default setting). ­ Rear Delay If the listening position is closer to the rear surround speakers than the front speakers, you can set the rear delay time to improve the surround sound effect. The test signal is generated through the left, centre, right, and surround speakers. Video output to your TV using the Scart jack. ¶ PR PB Y (this feature is not available for this model) ¶ Select S-VIDEO if you have connected the video output To your TV using S-Video jack. ­ Screen Saver If set to ON, when you leave the system in stop or pause mode for more than one minute, the screen saver will be activated. ­ Audio ­ Subtitle ­ Disc Menu q This is to select the audio language, subtitle language and the language used on TV screen menus or DVD menus that will always be used for every disc to be played back. Q If the language selected is not available on the disc, the original language designated by each disc will be selected. Rating - NO PARENT If parental control is not activated, it will play all discs. Rating - 1 to 8 If the player's parental level is set below 8, only discs with a lower or equal level will play. Bass rumble, explosions and low frequency effects you feel are delivered through the subwoofer. DTS offers more clarity and definition especially for higher tones. The better sound quality is a result of the limited sound compression (3:1 instead of 11:1 for Dolby Digital) and the 20-bit resolution. Dolby Pro Logic Surround The Dolby Pro Logic Surround system is a specially encoded two-channel analogue format that will produce sound through four speaker channels (front left, centre, front right, mono surround) when a Dolby Pro Logic Decoder is used. It is also compatible with stereo systems but the user will only have two-channel (front left & right) of sound. Matrix A new surround playback system that delivers amazingly rich and convincing five-channel surround outputs (front left/right, centre, surround left/right). VSS (Virtual Surround Sound) The ProLogic MPEG or Dolby Digital surround channel is processed by a `virtualiser' DSP to add surround effect from just the two front speakers. Stereo All sound is reproduced and played through the front left and right speakers. The digital sound effects allow you to select from various pre-set modes that control the frequency bands of sound to optimise certain musical styles. [. . . ] the display will show the next sleep timer options. To deactivate the sleep timer q Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button. Note: ­ If "Program" icon goes off before you select the desired preset number, press PROGRAM again. Notes: ­ If you attempt to programme more than 40 preset radio stations, "FULL" is displayed. [. . . ]