User manual PHILIPS LX7500R

[. . . ] DVD Recorder Home Theater System LX7500R/05 User manual Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. or BSI approved type. 3 Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. [. . . ] 11 On a DVD+RW select an empty title at the end of the disc. Otherwise previous recordings may be overwritten. If you wish your recording to be repeated, press RETURN as often as necessary to select the desired option: Mo-Fr: for recordings to be repeated daily from Monday to Friday Weekly: for recordings to be repeated weekly (every week on the same day) 12 A timer recording will only start if you have switched the DVD recorder system to standby or if you have selected TUNER, CD, CDR or TAPE: Press 2 or TUNER, CD, CDR or TAPE. If any recordings are programmed, TIMER lights up. 0 7 Press OK to confirm. The timer programme appears. To stop a running timer recording before the scheduled end, press 9 on the DVD recorder system. 34 Timer recording 1 Switch your TV set on. If necessary set the TV to the correct audio/video channel. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN, etc. These channels are often near channel 00. English Programming a recording without the VIDEO Plus® system 9 Press 2 to select the entry field Start. 10 Use 4, 3 or the numerical buttons to enter the start time. 0 To switch on VPS/PDC press RETURN as often as necessary until 8 lights up. VPS/PDC is switched on. 2 Press and hold DVD/MON for 1 second. 4 Press 4 or 3 as often as necessary to select the line Timer programming. 11 Press 2 to select the entry field End. 12 Use 4, 3 or the numerical buttons to enter the time to end. 0 To change the recording mode press RETURN as often as necessary to select the desired recording mode. The entire programming information is stored. 5 Press 2 to confirm the selection. 13 Press OK again to store the entire programming The entry field Date is selected. Timer Timer programming VPS Date Prog. Start PDC 19 End Rec Mode 14 Press TIMER to end. 15 Load a disc on which you want to record in the tray. The screen with the index pictures of the disc appears. PHI 09:00 * 10:30 M4 16 On a DVD+RW: Press 4 as often as necessary to select an empty title at the end of the disc. Otherwise previous recordings may be overwritten. Mo-Fr/Weekly Press RETURN To store Press OK 17 A timer recording will only start if you have switched the DVD recorder system to standby or if you have selected TUNER, CD, CDR or TAPE: Press 2 or TUNER, CD, CDR or TAPE. If any recordings are programmed, TIMER lights up. 0 6 Use 4, 3 or the numerical buttons to enter the date. 0 To programme a repeated recording press RETURN as often as necessary to select the desired option: Mo-Fr: for recording to be repeated daily from Monday to Friday e. g. Mo: for recording to be repeated weekly (every week on the same day, e. g. Monday) To stop a running timer recording before the scheduled end, press 9 on the DVD recorder system. 7 Press 2 to select the entry field Prog. . If you wish to programme recordings from additional equipment via a scart socket on the DVD recorder system select one of the following options: EXT1: Recordings via the scart socket 1 is selected. EXT2: Recordings via the scart socket 2 is selected. 35 Timer recording Checking, changing or deleting a timer recording 1 Switch your TV set on. If necessary set the TV to the correct audio/video channel. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN, etc. These channels are often near channel 00. Automatic recording from a satellite receiver English This feature can be used only if you own a satellite receiver that can control other equipment via a scart cable and a programming feature (timer). For more information, please see the user manual of the satellite receiver. 1 Make sure your satellite receiver is connected to EXT-2 AUX I/O with an RGB capable Scart cable, i. [. . . ] The DVD recorder system is ready for use! 4 Playing a disc 1 2 3 4 Press and hold DVD/MON for 1 second. Press OPEN/CLOSE / on the set to open the drawer. Insert a disc (printed side up) in the tray. Press OPEN/CLOSE / on the set to close the drawer. 5 If playback does not start automatically, press PLAY 2 to start playback. 0 To select one of the available surround 0 To interrupt playback press PAUSE ;. [. . . ]