User manual PHILIPS M390

[. . . ] MP3-CD Mini Hi-Fi System FW M390 1 3140 115 31141 México Es necesario que lea cuidadosamente su instructivo de manejo. PRECAUCIÓN - ADVERTENCIA No abrir, riesgo de choque eléctrico ATENCIÓN Verifique que el voltaje de alimentación sea el requerido para su aparato Para evitar el riesgo de choque eléctrico, no quite la tapa. En caso de requerir servicio, dirijase al personal calificado. Minisistema de Audio FW M390/21 110–127 / 220–240V~; 50–60 Hz 60 W Philips Mexicana, S. A. San Fernando La Herradura Huixquilucan Localidad y Tel: Edo. 52 69 90 00 Exportador: Philips Electronics HK, Ltd. [. . . ] ➜ PROG disappears and "PROGRAM CLEARED" is displayed. Note: – The programme will be erased when the system is disconnected from the power supply or when the disc tray is opened. Programming the disc tracks Programming tracks is possible when playback is stopped. Up to 99 tracks can be stored in the memory in any order. 1 Load the desired discs on the disc tray (refer to “Loading discs”). 2 Press DISC 1/2/3 to select a disc. 3 Press PROG to start programming. ➜ PROG starts flashing. For Recording, please refer to “Tape Operation/Recording”. 17 3140 115 31141 English Selecting a desired Album/Title (MP3 disc only) 4 Press í or ë repeatedly to select the desired Radio Reception English NEWS Tuning to radio stations 1 Press TUNER to select TUNER mode. ➜ "TUNER" is displayed. A few seconds later, the current radio frequency will appear on the display. waveband : FM or MW. 2 Press TUNER again to select the desired 3 Press and hold à or á until the frequency indication starts to change, then release. ➜ The display will show "SEARCH" until a radio station with sufficient signal strength is found. To begin automatic preset from a desired preset number G Press í or ë to select the desired preset number. ➜ If a radio station has been stored in one of the presets, it will not be stored again under another preset number. 2 Press and hold PROGRAM until "AUTO" is displayed. ➜ All available radio stations with sufficient signal strength will be stored automatically, starting from FM and followed by MW band. ➜ When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station will be played. To stop storing the automatic preset G Press PROGRAM or Ç on the system. Note: – If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden. 4 Repeat step 3 if necessary until you find the desired radio station. G To tune to a weak station, press à or á briefly and repeatedly until optimal reception found. Storing preset radio stations You can store up to 40 preset radio stations in the memory. Automatic Preset Programming G Plug and Play setting (refer to “Basic Functions Plug and Play”). OR 1 Press TUNER to select TUNER mode. 18 3140 115 31141 Radio Reception 1 Tune to your desired radio station (refer to “Tuning to radio stations”). all versions) In North and South America, the frequency step between adjacent channels in the MW band is 10 kHz (9 kHz in some areas). The preset frequency step in the factory is 9 kHz. Changing the tuning grid will erase all previously stored preset radio stations. 2 Press PROGRAM. ➜ PROG starts flashing. ➜ The next available preset number is displayed for selection. To store the radio station to another preset number G Press í or ë to select the desired preset number. 1 Disconnect the system from the AC power supply (pull out the AC power cord). 3 Press PROGRAM again to store the radio station. G Repeat steps 1–3 to store other radio stations. To exit manual preset mode G Press Ç on the system. [. . . ] Date of purchase:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Retailer:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . We recommend you retain your purchase receipt to assist in any warranty claim. 4. Home service within the normal service area of one of our Authorised Service Centres will only be provided for television receivers with screen size 48 cm and above. [. . . ]