User manual PHILIPS MC-128-37B

[. . . ] Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. [. . . ] Press PLAY·PAUSE 2; (on the remote control 2) to start playback if in the STOP position. If you have selected SHUFFLE, playback starts automatically. Reviewing the programme In STOP mode, press and hold down PROGRAM on the system or remote control, for a while until the display shows all your stored track numbers in sequence. Erasing the programme You can erase the programme by: ¶ pressing STOP 9 once in the STOP mode; ¶ pressing STOP 9 twice during playback; ¶ opening the CD compartment; PROGRAM disappears from the display. 3 To return to normal playback, press the respective SHUFFLE or REPEAT button until the various SHUFFLE/ REPEAT modes are no longer displayed. ¶ You can also press STOP 9 to cancel your play mode. Programming track numbers Programme in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to 20 tracks can be stored in the memory. 1 Press PROGRAM on the system or remote control to enter the programming mode. A track number is shown and PROGRAM flashes. Use the PREV ¡1 or NEXT 2TM on the system, (on the remote control ¡ or TM) to select your desired track number. Press PROGRAM to confirm the track number to be stored. The number of tracks programmed and total playing time of the programme is shown briefly, then the selected track and PROG. Repeat steps 2-3 to select and store all desired tracks. FULL is displayed if you attempt to programme more than 20 tracks. ­ Radio text messages ­ Frequency 1 Press PRESET 4 or 3 ( ¡ or TM on the remote control) to select the preset number where programming should start. Note: ­ If no preset number is selected, default is preset (1) and all your presets will be overridden. 14 3140 115 27752 pg 001-020/MC10/22-Eng 14 12/7/00, 1:29 PM Tuner Note: ­ If you press RDS and the RDS signal is not available NO RDS is displayed. RDS News and Traffic Announcement (TA) You may set up the tuner in such a way that listening to CD or tape is interrupted by the NEWS of a RDS station. This only works if the RDS station broadcasts a NEWS signal while sending the news. EON Enhanced Other Network allows you to search for an RDS station offering a certain programme type. If EON is available, is shown. 1 2 Tune to the desired RDS station. SURR more on the remote control to select the NEWS option. DE NEWS/TA NEWS ON, TA ON or OFF is Å UME displayed briefly. NEWS is displayed if you have activated the NEWS or TA option. Changing listening source will not disarm the function. Notes: ­ To avoid unwanted recordings, the NEWS announcement does not work while recording a tape. ­ When you receive RDS news or traffic announcements during CD playback, playback will pause and you will be able to hear the news/TA. Playback resumes after the broadcast has finished. [. . . ] 48 dBA Wow and flutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 4% DIN SPEAKERS Bass reflex system Dimensions (w x h x d) . 155 x 220 x 220 (mm) GENERAL INFORMATION AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 V / 50 Hz Dimensions (w x h x d) . . . [. . . ]