User manual PHILIPS MC-30

[. . . ] MC-30 Micro HiFi System 1 3140 115 27913 pg 001-021/MC30/22-Eng 1 12/7/00, 1:32 PM Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Italia DICHIARAZIONE DI CONFORMITA' Si dichiara che l'apparecchio MC-30 Philips risponde alle prescrizioni dell'art. Fatto a Eindhoven Philips Consumer Electronics Philips, Glaslaan 2 5616 JB Eindhoven, The Netherlands 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. [. . . ] The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning: SEARCH. If a FM station is received in stereo, STEREO is shown. Repeat step 3 if necessary until you find the desired station. ¶ You can override a preset station by storing another frequency in its place. 4 Tuning to preset stations ¶ Press PRESET 4 or 3 ( ¡ or TM on the remote control) until the desired preset station is displayed. ¶ To tune to a weak station, press TUNING 3 or 4 briefly and repeatedly until you have found optimal reception. RDS (some versions only) Programming radio stations You can store up to a total of 40 radio stations in the memory. Automatic programming Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden. The system will only programme stations which are not in the memory already. Radio Data System is a service that allows FM stations to show additional information. If you are receiving a RDS station, and the station name are displayed. When automatic programming is used, RDS stations will be programmed first. Scrolling through different RDS information ¶ Press RDS briefly and repeatedly to scroll through the following information (if available): ­ Station name ­ Programme type such as NEWS, SPORT, POP M . . . ­ Radio text messages ­ Frequency 1 Press PRESET 4 or 3 ( ¡ or TM on the remote control) to select the preset number where programming should start. Note: ­ If no preset number is selected, default is preset (1) and all your presets will be overridden. 14 3140 115 27913 pg 001-021/MC30/22-Eng 14 12/7/00, 1:33 PM Tuner Note: ­ If you press RDS and the RDS signal is not available NO RDS is displayed. RDS News and Traffic Announcement (TA) You may set up the tuner in such a way that listening to CD or tape is interrupted by the NEWS of a RDS station. This only works if the RDS station broadcasts a NEWS signal while sending the news. EON Enhanced Other Network allows you to search for an RDS station offering a certain programme type. If EON is available, is shown. 1 2 Tune to the desired RDS station. SURR more on the remote control to select the NEWS option. DE NEWS/TA NEWS ON, TA ON or OFF Å UME is displayed briefly. NEWS is displayed if you have activated the NEWS or TA option. Changing listening source will not disarm the function. Notes: ­ To avoid unwanted recordings, the NEWS announcement does not work while recording a cassette. ­ When you receive RDS news or traffic announcements during CD playback, playback will pause and you will be able to hear the news/TA. Playback resumes after the broadcast has finished. [. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8. 4 / 3. 3 kg Standby power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . < 3 W Subject to modification Troubleshooting WARNING Do not open the system as there is a risk of electric shock!Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty ¶ If a fault occurs, first check the points listed below before taking the system for repair. [. . . ]