User manual PHILIPS MC-M350

[. . . ] Micro Hi-Fi System MC-M350 1 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Italia DICHIARAZIONE DI CONFORMITA' Si dichiara che l'apparecchio MC-M350 Philips risponde alle prescrizioni dell'art. Fatto a Eindhoven Philips Consumer Electronics Philips, Glaslaan 2 5616 JB Eindhoven, The Netherlands 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. [. . . ] Press PROG/ REV (or PROGRAM/ REV on remote control) to enter the programming mode. A track number is shown and PROGRAM flashes. Use the or (11 or 22 on the remote control) to select your desired track number. Press PROG/ REV (or PROGRAM/ REV on remote control) to confirm the track number to be stored. The number of tracks programmed is shown. Repeat steps 2-3 to select and store all desired tracks. MEMORY FULL is displayed if you attempt to program more than 40 tracks. To start playback of your disc program, press STOP 9 followed by or press directly. 1 Selecting a desired ALBUM/ TITLE (Track) (MP3 disc only) To select a desired Album G Press or (11 or 22 on the remote control) repeatedly. To select a desired Title(Track) G Press or (¡ or TM on the remote control) repeatedly. 2 3 4 Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before playback. The REPEAT modes can also be combined with PROGRAM. tracks of the entire disc are played in random order SHUFFLE and REPEAT ALL. . . to repeat the entire disc continuously in random order REPEAT ALL . . . . repeats the entire disc/ program REPEAT . . . . . . . . . . . . . . . plays the current track continuously To select your play mode, press the SHUFFLE or REPEAT on the remote control before playback until the display shows the desired function. (SHUF, REPEAT, REPEAT ALL) 5 Erasing the program You can erase the program by: G pressing STOP 9 twice during playback; G opening the CD compartment; PROGRAM disappears from the display. G selecting another sound source 1 13 English Radio Reception English Programming radio stations You can store up to a total of 40 radio stations in the memory. Automatic programming Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden. The system will only program stations which are not in the memory already. 1 Press PRESET or to select the preset number where programming should start. Note: ­ If no preset number is selected, default is preset (1) and all your presets will be overridden. Tuning to radio stations 1 2 Select TUNER source. Press BAND (or DISPLAY on remote control) once or more to select your waveband (FM/ MW/ LW). The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning: SEARCH. [. . . ] If you are unable to remedy a problem by following these hints, consult your dealer or service center. Problem CD OPERATION "NO DISC" is displayed. Solution ­ Insert a disc. ­ Check if the disc is inserted upside down. ­ Wait until the moisture condensation at the lens has cleared. ­ Replace or clean the disc, see "Maintenance". [. . . ]