User manual PHILIPS MC-M570-21M

[. . . ] Micro Hi-Fi System MC-M570 visit our website www. audio. philips. com to download latest UPDATES of USB PC Link Driver MusicMatch Jukebox softwares and FAQs. Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Italia DICHIARAZIONE DI CONFORMITA' Si dichiara che l'apparecchio MC-M570, Philips risponde alle prescrizioni dell'art. Fatto a Eindhoven Philips Consumer Electronics Philips, Glaslaan 2 5616 JB Eindhoven, The Netherlands 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. [. . . ] Fully insert the stripped portion of the speaker wire into the terminal as shown. Notes: ­ Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit. ­ Do not connect more than one speaker to any one pair of +/- speaker terminals. 1 Open the battery compartment cover. 2 Insert two batteries type R06 or AA, following the indications (+-) inside the compartment. 3 Close the cover. Using the remote control to operate the system Step 3: Connecting to PC (page 3 ­ P5) 1 Aim the remote control directly at the remote sensor (iR) on the main unit. Use the supplied USB cable to connect the system to your personal computer's USB port. After installed the USB PC LINK application software onto your PC, you are able to playback your music collection via the system (refer to "USB PC Link"). 2 Select the source you wish to control by pressing one of the source select keys on the remote control (for example CD, TUNER). 3 Then select the desired function (for example É , í, ë). Å Step 4: Connecting the AC power cord CAUTION! ­ Remove batteries if they are exhausted or will not be used for a long time. ­ Do not use old and new or different types of batteries in combination. ­ Batteries contain chemical substances, so they should be disposed of properly. "AUTO INSTALL ­ PRESS PLAY" may appear on the display panel when the AC power cord is plugged into the power outlet for the first time. Press É on the main unit to store all available Å radio stations (page 3 ­ P3) or press Ç to exit (refer to "Tuner Operations"). 11 English USB PC Link Quick Setup Guide PC system requirement ­ ­ ­ ­ ­ Windows 98 (SE)/ ME /2000 / XP Intel Pentium MMX200 or higher CD-ROM drive USB port Free hard disk space: 15 MB for the software 4 The installation guide will appear automatically. If it does not, go to the CD-ROM drive in Windows Explorer and double click on the "USBPCLINK. exe". Then perform the following steps: ­ First, select your desired language from the list. ­ Then, select "installer driver" and follow by "installer MusicMatch jukebox". ­ Select other options (Tutorial, Free goodies, FAQ). Note: ­ You are advised to read the MusicMatch tutorial before using it for the first time. Make sure the mute function on the PC is deactivated in order to ensure sound output from the Audio System. For optimum performance, the equaliser function in MusicMatch should be set to a low level. 3 POWER ON/OFF English Install MusicMatch software 4 USB PC LINK 2 1 5 Launch the "MUSICMATCH JUKEBOX" and choose to do one of the followings : To create a "Playlist" 5 1 Use the supplied USB cable to connect the audio system to your personal computer's USB port. Select "Open" button on the MusicMatch Jukebox and simply drag / drop the music tracks from anywhere on your PC into the "Playlist" window. Remember to save this "Playlist" for future use. To create a music library A music library of all stored music files available on your PC can be setup by simply select "add" function on the MusicMatch Jukebox. Once created, you may then choose to drag /drop any music tracks from this library to a "Playlist" for music playback. Note: ­ It is not possible to create a playlist from the system's 5 CD changer. If you encounter problem using USB PC LINK, please refer to the FAQ (Frequently Asked Questions) stored in your USB PC LINK installer disc or visit "www. audio. philips. com" for latest update on FAQ. 2 Press USB PC LINK. 3 Turn on the PC and insert the USB PC LINK installer disc (which comes with this product) onto the PC's CD-ROM drive. This application software can also be downloaded from "http://www. audio. philips. com". IMPORTANT! Please use this customised MusicMatch software for your USB PC Link application. Remember to un-install all other MusicMatch jukebox software first from your PC system (if available). 12 USB PC Link Enable digital CD audio output Before playing the CD through your PC's CD-ROM drive, it is necessary to configure your PC's hardware as follows: Connecting to USB PC Link USB PC LINK allows you to playback your music collection from the PC via the powerful amplifier and speakers of this system. 1 Enter the system control panel menu and select: "SYSTEM TM HARDWARE TM DEVICE MANAGER TM CD-ROM DRIVES TM ACTION­PROPERTIES TM PROPERTIES". OR For Windows ME / 2000 /XP IMPORTANT! Make sure the MusicMatch software has been installed. [. . . ] Alternatively, you can use a "single to double" cinch cable, but the output sounds still remain mono. 2 Before the system switches to Eco Power standby mode, a countdown of 10 seconds is displayed. "SLEEP 10" TM "SLEEP 9". . . . TM "SLEEP 1" TM "SLEEP" 2 Press AUX repeatedly. To cancel the sleep timer q Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON B button. Select "AUX" when connecting to a TV, VCR or Laser Disc player. Select "AUX/CDR" when connecting to a CD recorder or DVD player. 3 Press PLAY on the connected device to start playback. Notes: ­ All the sound control features (DSC, VEC for example) are available for selection. ­ Always refer to the owner's manual of the other equipment for complete connection and use details. 23 English Specifications English AMPLIFIER Output power Signal-to-noise ratio Frequency response Input sensitivity AUX/CDR In Output Speakers Headphones (1) (6 , 1 kHz, 10% THD) 2 x 200 W MPO 2 x 100 W RMS(1) 75 dBA (IEC) 50 ­ 20000 Hz, ­3 dB 500 mV/1V 6 32 ­ 1000 DISC PLAYER Programmable tracks Frequency response Signal-to-noise ratio Channel separation MPEG 1 Layer 3 (MP3-CD) MP3-CD bit rate Sampling frequencies USB Frequency response Signal-to-noise ratio Channel separation Total harmonic distortion TUNER FM wave range MW wave range Number of presets Antenna FM AM SPEAKERS System Impedance Woofer Tweeter cooled Dimensions (w x h x d) Weight GENERAL Material / finish AC Power Power Consumption Active Standby Eco Power Standby Dimensions (w x h x d) Weight (without speakers) 99 20 ­ 20000 Hz, ­3 dB 76 dBA 60 dB (1 kHz) MPEG AUDIO 32-256 kbps (128 kbps advised) 32, 44. 1, 48 kHz 20 ­ 20000 Hz, ­3 dB 75 dBA 40 dB (1 kHz) < 0. 3% (1 kHz) 87. 5 ­ 108 MHz 531 ­ 1602 kHz 40 75 wire Loop antenna 3 way, Bass reflex 6 1 x 6. 5" 1 x 1. 5" Ferrofluid 205 x 268 x 230 (mm) 3, 1 kg each Polystyrene /Metal 220 ­ 230 V / 50 Hz 80 W < 15 W < 0. 5 W 175 x 268 x 316 (mm) 5. 3 kg Specifications and external appearance are subject to change without notice. 24 Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. [. . . ]