User manual PHILIPS MC108

[. . . ] Micro Hi-Fi System MC108 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 3 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] starts or pauses CD playback. VOLUME 6 * DBB MUTE 9n 0 ÉÅ !¡1 / 2TM skips to the beginning of a current track/ previous/ next track. fast searches back and forward within a track/ CD. stops CD playback or erase a CD program. activates/deactivates or selects the sleeper time. activates/deactivates or sets the timer function. ( @ STOP 9 # AUX IN $ REPEAT % SHUFF (SHUFFLE) ^ SLEEP & TIMER Notes for remote control: ­ First select the source you wish to control by pressing one of the source select keys on the remote control (for example CD , TUNER). ­ Then select the desired function (for exampleÉ, í, ë). Basic Functions Adjusting volume and sound 1 Press VOLUME ­ / + to increase or decrease volume. Display shows the volume level and a number from 0-32. Press DBB (on the remote control) to switch bass enhancement on or off. Display shows: DBB if the DBB is activated. VOLUME 2 OP EN / CLO S E DBB MUTE POWER SOURCE BAND PROG/CLOCK - VOLUME + TUNING 3 IMPORTANT: Before you operate the system, complete the preparation procedures. Press MUTE on the remote control to stop sound play-back instantly. Playback will continue without sound and the display shows MUTE . ­ ­ ­ To start sound playback you can: press MUTE again; adjust the volume controls; change source. Switching the system on Press POWER (y on the remote control). The system will switch to the last selected source. Press SOURCE (CD, TUNER or AUX on the remote control). The system will switch to the selected source. To switch the system to standby mode Press POWER (y on the remote control). The volume level (up to maximum volume level of 20), interactive sound settings, last selected source will be retained in the player's memory. Power-saving automatic standby The power-saving feature automatically switches to standby 15 minutes after a CD playback has ended and no control is operated. 9 English CD Operation English MICRO SYSTEM MC108 5 iR To pause playback press 2;. The display freezes and the current track number flashes when playback is paused. Note: CD play will also stop when; ­ the CD door is opened. ­ you select another source: AUX, TUNER. ­ you select standby. 6 PROG TRK DBB REP ALL CD Selecting a different track AUX-IN IMPORTANT: The lens of the CD player should never be touched. Press ¡1 or 2TM once or repeatedly until the desired track number appears in the display. If you have selected a track number shortly after loading a disc, or in the PAUSE position, you will need to press 2; to start playback. Finding a passage within a track 1 Press and hold down ¡1 or 2TM . [. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4. 9 / 2. 3 kg Standby power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . < 3 W Subject to modification Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. [. . . ]