User manual PHILIPS MC165

[. . . ] Stops CD play and erases the program 4 PRESET. After all other connections have been made, connect this mains lead to the wall socket. Switches the news announcement on and off DBB. Note: Select the desired sound source first and then press the required function key. [. . . ] If no key or control is adjusted during 30 minutes of timer set playback, the unit will automatically switch to standby mode. ¡ or NEXT TM on the remote control) once or several times to skip to the beginning of the current, previous or subsequent track(s). Playback continues with the selected track. Selecting a track when playback is stopped 1 Briefly press or § (PREV. ¡ or NEXT TM on the remote control) once or several times. Searching for a passage during playback 1 Keep or § depressed (5 or 6 on the remote control) to find a particular passage in a backward or forward direction. © Playback continues at a low volume. Note: Playback will also stop if: ­ you open the CD tray, ­ the end of the CD is reached or ­ you select TUNER or AUX. This CD player can play all kinds of Audio Disc such as CD-Recordables and CD-Rewritables. Do not try to play a CD-ROM, CD-I, CDV or computer CD. The total number of tracks and the total playing time of the CD are displayed. 3 Press 2; (PLAY 2 on the remote control) to start playback. © The current track number and the elapsed playing time are displayed. 4 Press 9 (STOP 9 on the remote control) to stop playback. © The total number of tracks and the total playing time of the CD are displayed. Repeating a track, the CD or the program 1 Press repeatedly REPEAT on the remote control during playback to select either: © REPEAT: The current track is played repeatedly. © REPEAT ALL: The entire CD (or program) is played repeatedly. 3 To return to normal playback, press REPEAT on the remote control until the display indication disappears. Playing tracks in random order 1 Press SHUFFLE during playback. Note: During shuffle, while repeating a track or playing a program, searching is only possible within the particular track. If the CD-player cannot read CDs correctly use a commonly available cleaning CD to clean the lens before taking the CD-player to repair. Other cleaning methods may destroy the lens. [. . . ] Disconnect the set from power supply, reconnect after a few seconds. direct the antenna for optimum reception. Keep the set away from electrical equipment. Use FINALIZE on the CD recorder to complete the recording. [. . . ]