User manual PHILIPS MC230

[. . . ] Micro Hi-Fi System MC230 user manual 1 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] Note: CD play will also stop when; ­ the CD door is opened. ­ you select another source: TUNER or AUX. 5 6 Selecting a different track Press í or ë once or repeatedly until the desired track number appears in the display. If you have selected a track number shortly after loading a disc or in the PAUSE position, you will need to press É Åto start playback. Playing a disc CD-ROM, CD-I, CDV, VCD, MP3, DVD or computer CDs, however, are not possible. Finding a passage within a track 1 2 Press and hold down on à or á. The disc is played at high speed and low volume. When you recognise the passage you want, release à or á. Normal playback continues. 1 2 Press SOURCE to select CD. Press OPEN · CLOSEç on the front panel of the system to open the CD compartment. OPEN is displayed when the compartment cover slides up. Insert a disc with the printed side facing up. Press OPEN · CLOSEç again to close the compartment. READING is displayed as the CD player scans the contents of the disc. The total playing time and the total number of tracks are displayed. 3 12 CD Operation Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. The REPEAT modes can also be combined with PROGRAM. tracks of the entire disc are played in random order SHUFFLE and REPEAT ALL. . . to repeat the entire disc continuously in random order REPEAT ALL . . . repeats the entire disc/ program REPEAT . . . . . . . . . . . . plays the current track continuously 4 Repeat steps 2-3 to select and store all desired tracks. FULL is displayed if you attempt to program more than 40 tracks. To start playback of your disc program, press STOP 9 followed by É Åor press É Ådirectly. 5 Reviewing the program In STOP mode, press and hold PROGRAM. Until the display shows all your stored track number in sequence. Erasing the program You can erase the program by: pressing STOP 9 once in the STOP mode; pressing STOP 9 twice during playback; opening the CD compartment; PROGRAM disappears. CLEAR is displayed briefly. 1 To select your play mode, press the SHUFFLE or REPEAT on the remote control before or during playback until the display shows the desired function. (SHUFFLE, REPEAT, REPEAT ALL) PressÉ Åto start playback if in the STOP position. If you have selected SHUFFLE, playback starts automatically. 2 3 To return to normal playback, press the respective SHUFFLE or REPEAT button until the various SHUFFLE / REPEAT modes are no longer displayed. [. . . ] Cleaning the disc lens After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. [. . . ]