User manual PHILIPS MC235-37B

[. . . ] The higher decibel ranges are offered for those that may have already experienced some hearing loss. Over time your hearing "comfort level" adapts to higher volumes of sound. So after prolonged listening, what sounds "normal" can actually be loud and harmful to your hearing. To guard against this, set your volume to a safe level before your hearing adapts and leave it there. To establish a safe volume level: Set your volume control at a low setting. [. . . ] Press SOURCE (or CD, TUNER or AUX on the remote control). The system will switch to the selected source. To switch the system to standby mode Press STANDBY-ON / 2. The system enters the standby mode with clock display. The volume level (up to a maximum volume level of 20), interactive sound settings, source and tuner presets will be retained in the player's memory. To activate sound reproduction you can: ­ press MUTE again; ­ adjust the volume controls; ­ change source. 11 English CD Operation English IMPORTANT!The lens of the CD player should never be touched. 4 PressÉ Åto start playback. Current track number and elapsed playing time of the track are displayed during disc playback. To interrupt playback pressÉ PressÉ Å. Note: CD play will also stop when; ­ the CD door is opened. ­ you select another source: TUNER, AUX or standby. 5 6 Selecting a different track Press í or ë once or repeatedly until the desired track number appears in the display. If you have selected a track number shortly after loading a disc or in the PAUSE position, you will need to pressÉ Åto start playback. Playing a disc This CD player plays Audio Discs including CDRecordables and CD-Rewritables. From this preset number upwards, former programmed radio stations will be overridden. The system will only program stations which are not in the memory already. 1 2 Select TUNER source or in the tuner mode. Press STOP on the set for at least 5 seconds. The display will show "GRID 9" or "GRID10". Notes: ­ GRID 9 and GRID 10 indicate that the tuning grid is in step of 9 kHz and 10 kHz respectively. ­ The FM tuning grid also will be changed from 50 kHz to 100 kHz or vice versa. 1 Press PRESET ¡ or TM to select the preset number where programming should start. Note: ­ If no preset number is selected, default is preset (1) and all your presets will be overridden. 14 Clock/Timer 2 Press SOURCE or VOLUME +/- to select sound source. Press TIMER to confirm your desired mode. The clock digits for the minutes flash. The timer is now set and activated. 3 4 5 6 7 Activating and deactivating TIMER Setting the clock 1 In standby mode or system on, press and hold CLOCK SET on the remote control for more than 3 seconds. The clock digits for the minutes flash. [. . . ] Home service is provided only within the normal service area of one of our recommended Authorised Service Centres (ASC). It will be provided for television receivers only with a screen side of 67cms or above (product includes CRT, LCD TV, PTV, and Plasma TV). Televisions with screen side less than 67cms and all other products types are to be taken or sent by the consumer to the workshop of your nearest Authorised Service Centre, at the Consumer's expense. This Manufacturers Warranty is limited to 3 months for the above listed Consumer Electronics products if used in commercial applications. [. . . ]