User manual PHILIPS MC70

[. . . ] 7 Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Clock/Timer Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Setting the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If in tape mode or recording mode, press STOP·OPEN first. The volume level (up to maximum volume level of 20), interactive sound settings, last selected source and tuner presets will be retained in the player's memory. To start sound playback you can: again; ­ press MUTE ­ adjust the volume controls; ­ change source. Power-saving automatic standby The power-saving feature automatically switches to standby 15 minutes after a tape or CD playback has ended and no control is operated. 11 English CD Operation English IMPORTANT: The lens of the CD player should never be touched. 4 Press 2; to start playback. Current track number followed by elapsed playing time of the track are displayed during disc playback. Press DISPLAY/CLOCK to display total remain playing time. Display: The elapsed time flashes when playback is paused. Note: CD play will also stop when; ­ the CD door is opened. ­ you select another source: TAPE, TUNER. ­ you press the tape deck PLAY 2 key. 5 6 Selecting a different track Press ¡1 or 2TM once or repeatedly until the desired track number appears in the display. Press 2; to start playback. Playing a disc This CD player plays Audio Discs including CDRecordables and CD-Rewritables. ¶ CD-ROM, CD-I, CDV, VCD, DVD or computer CDs, however, are not possible. Finding a passage within a track 1 Press and hold down ¡1 or 2TM . The disc is played at high speed and low volume. Automatic programming Automatic programming will start with a chosen preset number 1. From this preset number upwards, former programmed radio stations will be overridden. 1 Press STOP/BAND (on the set) or TUNER (on the remote control) once or more to select your waveband. Press PRESET G / H (3 / 4 on remote control) to select the preset number where programming should start. Note: ­ If no preset number is selected, default is preset (1) and all your presets will be overridden. 2 Tuning to radio stations 1 2 Select TUNER source. Press STOP/BAND (on the set) or TUNER (on the remote control) once or more to select your waveband. Press on TUNING ¡1 or 2TM and release button. The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning Srch. If, however, you wish to record over this side again, cover the tabs with a piece of adhesive tape. Tape playback 1 2 3 4 5 6 7 8 Select TAPE source. throughout tape Pull down the plate marked "OPEN·CLOSE" at the bottom of the main set. Press STOP·OPENÇç to open the tape door. Insert a recorded tape and close the tape door. [. . . ] 220 ­ 240 V / 50 Hz Dimensions (w x h x d) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 x 224. 5 x 214. 5 (mm) Weight (with/without speakers) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]