User manual PHILIPS MCB279

[. . . ] Micro Hi-Fi System Register your product and get support at MCB279 www. philips. com/welcome User manual Benutzerhandbuch Manuale dell'utente Brukerhåndbok Brugervejledning Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 3 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] MP3/WMA: Press ALBUM/ PRESET +/- on the set or remote control once or more to select the next or previous album. or In the stop position, press ALBUM/ PRESET +/- on the set or remote control and then 4 / ¢ ( or í/ ë on the remote control ) to select the desired album and track. MP3/WMA: Display shows current album/ track number. Finding a passage within a track during playback Programming tracks You may store up to 32 tracks in the desired sequence. If you like, store any track more than once. 1 2 In stop position, press PROGRAM to start programming. Press 4 / ¢ on the set (or í/ ë on the remote control) once or repeatedly until the desired track number appears in the display. MP3/WMA: press ALBUM/ PRESET +/- on the set (or 3 / 4 on the remote control ) and 4 / ¢ on the set (or í/ ë on the remote control ) to select the desired album and track. 3 Press PROGRAM to confirm. Display shows briefly the number of tracks programmed. Then, the display shows the track number you just stored. Repeat steps 2-3 to select and store all desired tracks. PROG FULL is displayed if you attempt to program more than 32 tracks. Helpful hints: ­ The set will return to the stop position if no button is pressed within 20 seconds. ­ MP3/WMA: When playing a program, use of ALBUM/ PRESET are void. 4 1 2 During playback, press and hold 4 / ¢ on the set (or à / á on the remote control ). When you recognize the passage you want, release 4 or ¢ or à / á. Normal playback resumes. 5 Erasing the program To erase the contents of the memory, you can: Press STOP 9 ­ once if in the stop position; ­ twice during playback; Press STANDBY-ON/ ECO POWER. PROG disappears. 17 English CD English Different play modes: REPEAT, SHUFFLE REP ­ plays the current track continuously. REP ALL ­ plays the entire disc/program continuously. SHUFFLE ­ plays all the tracks in random order. SHUFFLE REP ALL ­ repeatedly plays all the tracks in random order. INTRO ­ plays the first 10 seconds in each track OFF­ plays tracks normally Display track information (MP3/WMA only) The ID3 tag is part of an MP3/WMA file and contains various track information such as the track´s title or the artist´s name. During playback, press DISPLAY repeatedly on the remote control. Display show title name, album name and ID3 tag information. Helpful hints: ­ Complete the ID3 tag information with your MP3/WMA encoder software before burning the MP3/WMA-CD. 1 2 During playback, press once or more REPEAT or SHUFFLE to select play modes. [. . . ] Problem "NO DISC" is displayed. Wait until the moisture condensation at the lens has cleared. Replace or clean the disc, see "Maintenance". Use a finalised CD-RW or a correct MP3/WMA -CD format disc. Some files on the USB device are not displayed. Check if the number of folders exceeds 999 or the number of titles exceeds 999 If the signal is too weak, adjust the antenna or Radio reception is poor. connect an external antenna for better reception. [. . . ]