User manual PHILIPS MCB395

[. . . ] Micro Hi-Fi System Register your product and get support at MCB395 www. philips. com/welcome User manual Benutzerhandbuch Manuale dell'utente Brukerhåndbok Brugervejledning Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] The backlight of clock display is dim in standby. The volume level (up to a maximum volume level of 12), interactive sound settings, last selected mode, source and tuner presets will be retained in the player's memory. To view the clock time in Standby mode, press and hold ECO POWER/STANDBY ON 2 for 3 seconds or more. The system enters the normal standby mode with clock display. Displaying the clock During playback, press CLOCK on the remote control to display clock. 15 English CD/MP3-CD Operations English IMPORTANT!The lens of the CD player should never be touched. X To interrupt playback Press É . Å To resume playback, press É again. Å To stop playback Press Ç. Notes: ­ Disc play will also stop when you select another source or the disc has reached the end. ­ For MP3 disc, the disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc. Text display During CD playback Press DISPLAY repeatedly to see the following information. Track number and elapsed playback time of current track. Track number and remaining playback time of current track. Track number and total elapsed playback time. Track number and total remaining playback time. During MP3-CD playback Press DISPLAY repeatedly to select two display modes : ID3 ON and ID3 OFF. ID-3 ON The current track information (album name, track name, and ID-3 tags) scrolls cyclically. ID-3 OFF Only playback time is displayed. Discs for playback This system is able to play : ­ All pre-recorded audio CDs ­ All finalised audio CDR and audio CDRW discs ­ MP3-CDs (CD-ROMs with MP3 tracks) CD-ROM, CD-I, CDV, VCD, DVD or computer CDs, however, are not possible. Playing a disc 1 2 3 Select CD source. Press OPEN/CLOSE 0 on the front panel to open the CD compartment. Insert a disc with the printed side facing up and press OPEN/CLOSE 0 to close the CD door. "READING" is displayed as the CD player scans the contents of a disc, and then the total number of tracks and playing time (or the total number of albums and tracks for MP3 disc) are shown. Å Selecting a different track Press TUNING S / T repeatedly until the desired track number appears in the display. If playback is stopped, pressÉ to start Å playback. 4 16 CD/MP3-CD Operations Finding a passage within a track 1 2 Press and hold down on TUNING S / T. When you recognize the passage you want, release TUNING S / T. [. . . ] To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. 27 English Troubleshooting English 28 WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. [. . . ]