User manual PHILIPS MCB700

[. . . ] Micro Hi-Fi System MCB700 User manual Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] Press ALB +/- on the remote to select a desired album. Press the control knob on the front panel to the left or right (corresponding to S/T) or press ¡ / TM on the remote to select a desired track. The album number will change accordingly as you reach the first track of an album by pressing S (¡ on the remote) or the last track of an album by pressing T (TM on the remote). Press ENTER/ÉÅ to start playback. Supported MP3 disc formats: ­ ISO9660, Joliet ­ Maximum title number: 512 (depending on filename length) ­ Maximum album number: 255 ­ Supported sampling frequencies: 32 kHz, 44. 1kHz, 48 kHz ­ Supported Bit-rates: 32~256 (kbps), variable bitrates Press and hold the control knob on the front panel to the left or right (corresponding to S/T) or press 5 /6 on the remote. When you recognize the passage you want, release the control knob (5 /6 on the remote). To resume, press ENTER/ÉÅ again. To stop playback 2 3 Press CANCEL / 9 . To interrupt playback Press ENTER/ÉÅ during playback. The display freezes and the elapsed playing time flashes when playback is interrupted. Notes: CD play will also stop when; ­ the CD door is opened. ­ you select another source: TUNER, DAB or AUX. To scan all discs in a disc Press INTRO/SCAN on the remote to play the first 10 seconds of each track in the whole disc one by one. The playback will start from the first track of the current disc. To scan all discs in a disc Press INTRO/SCAN on the remote again until INTRO disappears. 4 13 English CD/MP3-CD Operation English Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. The REPEAT modes can also be combined with PROGRAM. Programming track numbers Program in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to 20 tracks can be stored in the memory. 1 To select your play mode, press SHUFFLE or REPEAT on the remote control before or during playback until the display shows the desired function. SHUFFLE appears if the shuffle playback is activated and disappears if deactivated. If REPEAT appears while TRK flashes on the display panel, it indicates to play the current track repeatedly. If REPEAT ALL is displayed, it indicates to play all tracks in the whole disc repeatedly. For an MP3 CD, if both REPEAT and TRK flash on the display panel, it indicates to play the current track repeatedly. [. . . ] <7 W Eco power standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <1 W Specifications and external appearance are subject to change without notice. Maintenance Cleaning the Cabinet Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs When a disc becomes dirty, clean it with a cleaning cloth. [. . . ]