User manual PHILIPS MCD296

[. . . ] DVD Micro Theatre MCD296 User manual Manuel d'utilisation Manual del usuario Benutzerhandücher Gebruikershandleidingen Manuale per l'utente Användarhandböckerna Brugermanual Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Italia DICHIARAZIONE DI CONFORMITA' Si dichiara che l'apparecchio MCD296 Philips risponde alle prescrizioni dell'art. Fatto a Eindhoven Philips Consumer Electronics Philips, Glaslaan 2 5616 JB Eindhoven, The Netherlands 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. [. . . ] ­ DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc matches the regional code of your player. ­ According to the format requirement of DVD or VCD, some operations may be different or restricted. ­ Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction. ­ If "INVALID KEY" appears on the TV screen when a button is pressed, it means the function is not available on the current disc at the current time. Using the disc menu For disc with Table Of Contents, a menu may appear on the TV screen once you load the disc. To select a playback feature or item Use 22/33/5/4 and OK or Numeric Keypad (0-9) on the remote. To access or exit the menu Press DISC MENU on the remote. For VCD with Playback Control (PBC) feature (version 2. 0 only) PBC playback allows you to play Video CDs interactively, following the menu on the display. If PBC was ON, it will switch to OFF and continue playback. If PBC was OFF, it will switch to ON and return to menu screen. Basic playback controls Pausing playback (DVD/VCD/CD/MP3 /WMA) Playing discs 1 2 3 Connect the power cords of the system and TV (or any optional stereo or AV receiver) to a power outlet. Turn on the TV power and set to the correct Video In channel. (See "Setting up the TV". ) Press ECO POWER/STANDBY-ON 2 on the DVD Player front panel. You should see the blue Philips DVD background screen on the TV. Press OPEN/CLOSE 0 to open the disc door and load in a disc, then press the same button again to close the disc door. Playback will start automatically (depending on the disc type). If a disc menu appears on the TV, see "Using the Disc Menu". If the disc is locked by parental control, you must enter your four-digit password. (See "SYSTEM SETUP-PASSWORD". ) At any time, simply press 9 to stop playback. 1 2 During playback, press 2;. Playback will pause and sound will be muted. Selecting a track/chapter/title (DVD/ VCD/CD/MP3/WMA) 1 2 Press PRESETí/ë during playback to go to the previous or next chapter/title/track. To go directly to any chapter/ title/track, enter the chapter/ title/track number using the Numeric Keypad (0-9). [. . . ] Digital sound is available when you use the DIGITAL AUDIO OUT COAXIAL or OPTICAL jacks. These jacks send audio through multiple channels, instead of just two channels as analog does. Dolby Digital: A surround sound system developed by Dolby Laboratories containing up to six channels of digital audio (front left and right, surround left and right and center). JPEG: A still-picture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio. [. . . ]