User manual PHILIPS MCDB710

[. . . ] DVD Micro Theatre Register your product and get support at MCDB710 www. philips. com/welcome User manual Brugervejledning Brukerhåndbok Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 3 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] SUBTITLE LANG (DVD only) Switches the display language of the subtitle. Select the language from the displayed list. MENU LANG (DVD only) Select the language for the DVD menu. When the selected language is not recorded in the DVD, one of the recorded languages will be selected automatically (except for OSD). You can reset all the DVD settings except for Rating. If the language selected is not available on the disc, the original language designated by each disc will be selected. 1 2 Turn off your TV progressive scan mode or turn on to interlaced mode (refer to your TV user manual). Press SYSTEM MENU on the remote to exit the system menu and then DISC and "1" to exit progressive scan. The DVD blue background screen will appear on the TV. Note: ­ During normal playback in the progressive scan mode, pressing DISC button and "1" will exit the progressive scan mode. 3 Step 3: Setting language preference 1 2 In stop mode or during playback, press SYSTEM MENU. Press 2/3/5/4 on the remote control to select your preferred option. Move to one of the following and press 3. Press 5/4 to select a language and press OK/ ENTER. To exit the menu Press SYSTEM MENU again. 4 18 Basic Operations Switching the system on/off Press ECO POWER/STANDBY-ONB. "Welcome to PHILIPS Audio" is displayed briefly. The system will switch to the last selected source. Press DISC, FM/DAB, USB or AUX on the remote control. The system will switch to the selected source. To switch the system to standby mode Press ECO POWER/STANDBY-ONB. Sound control DBB, DSC and LOUDNESS sound features cannot be activated at the same time. DBB (Dynamic Bass Boost) Press DBB on the remote control to enable/ disable DBB feature. Some discs might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume. DSC (Digital Sound Control) Switching the system to Eco Power Standby mode Press ECO POWER/STANDBY-ON B in active mode. The system enters Eco power standby (the ECO POWER LED is on) or normal standby mode with clock display. [. . . ] 2) Press SYSTEM MENU on the remote to exit the system menu and then DISC and "1" to exit progressive scan. Distorted or poor picture. Sometimes a small amount of picture distortion may appear. This is not a malfunction. Clean the disc. Completely distorted picture or black/ white picture. TV has a colour system standard. If the disc's or DVD system's colour system is different than your TV's colour system, the picture may be distorted or colourless. Troubleshooting The aspect ratio of the screen cannot be changed even though you have set the TV shape. [. . . ]