User manual PHILIPS MCM119

[. . . ] Micro System MCM119 User manual Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 3 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] ­ no button is pressed within 15 minutes in the CD PAUSE position. 1 To select your play mode, press MODE on the top of the system (SHUFFLE or REPEAT on the remote) before or during playback until the display shows the desired function. (SHUFFLE, REPEAT, REPEAT ALL) PressÉÅ to start playback if in the STOP position. If you have selected SHUFFLE, playback starts automatically. To return to normal playback, press MODE on the top of the system or the respective SHUFFLE or REPEAT button on the remote until the various SHUFFLE / REPEAT modes are no longer displayed. 2 Playing an MP3 disc 1 Load an MP3 disc. The disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc. ID3 information (if available) scrolls followed by the first album and track numbers. Press ALBUM/PRESET + / - on the remote to select a desired album. Press í / ë to select a desired track. The album number will change accordingly as you reach the first track of an album by pressing í or the last track of an album by pressing ë. Press ÉÅ to start playback. Supported MP3 disc formats: ­ ISO9660, Joliet, UDF 1. 5 ­ Maximum title number: 400 (depending on filename length) ­ Maximum album number: 40 ­ Supported sampling frequencies: 32 kHz, 44. 1kHz, 48 kHz ­ Supported Bit-rates: 32~256 (kbps), variable bitrates 3 You can also press 9 to cancel your play mode. 2 3 Programming track numbers Program in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to 40 tracks can be stored in the memory. 1 4 Press PROGRAM (PROG on the remote) to enter the programming mode. A track number is shown and PROGRAM flashes. Use í / ë to select your desired track number. For MP3 CD, press ALBUM/PRESET + / on the remote to select your desired album. 2 Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. The REPEAT modes can also be combined with PROGRAM. tracks of the entire disc are played in random order REP ALL . . . . . . . . . . . repeats the entire disc/ program REPEAT . . . . . . . . . . . . plays the current track continuously 13 English CD/MP3-CD Operation 3 English Press PROGRAM (PROG on the remote) to confirm the track number to be stored. The number of tracks you just stored is shown briefly. Repeat steps 2-3 to select and store all desired tracks. [. . . ] Cleaning the disc lens After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. [. . . ]