User manual PHILIPS MCM128B

[. . . ] Micro Hi-Fi System MCM128B Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] OPEN is displayed when you open the CD compartment. O PE Playing an MP3 disc N / C LOS E 1 TUNING PROG/CLOCK - VOLUME + 3 Insert a disc with the printed side facing up and press down on OPEN/CLOSE3 to close the CD door. READ is displayed as the CD player scans the contents of a disc, and then the total number of tracks and playing time (or the total number of albums and tracks for MP3 disc) are shown. 2 Load an MP3 disc. The disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc. Track number "XXX" and album number "ALBUM XXX" will be displayed interchangeably. Press ALBUM 4 3 to select a desired album. . 12 CD/MP3 Operation 3 Press ¡1 2TM to select a desired track. The album number will change accordingly as you reach the first track of an album by pressing ¡1 or the last track of an album by pressing 2TM . Supported MP3 disc formats: ­ ISO9660, Joliet, UDF 1. 5 ­ Maximum title number: 512 (depending on filename length) ­ Maximum album number: 99 ­ Supported sampling frequencies: 32 kHz, 44. 1, kHz, 48 kHz ­ Supported Bit-rates: 32~256 (kbps), variable bitrates Programming track numbers Programme in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to 40 tracks can be stored in the memory. 4 1 In the stop position, use the ¡1 2TM to select your desired track number. For MP3, you may press ALBUM 4 3 to select a desired album, then press ¡1 2TM to select your desired track. An album folder cannot be programmed as a whole. Press PROGRAM (or PROG/CLOCK on the set) to store. Display: PROG flashes, and is displayed briefly, then the selected track number (and the selected album number for MP3). Repeat steps 1-2 to select and store all desired tracks. FULL is displayed if you attempt to programme more than 40 tracks. To start playback of your disc programme, press 2;. Note: ­ During playback, pressing PROGRAM (PROR/CLOCK on the set) will display "NO SELECT". Stop the playback before you press this button to enter program mode. 2 Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. tracks of the entire disc are played in random order REPEAT ALL . . . repeats the entire disc/ programme REPEAT . . . . . . . . . . . . plays the current track continuously REPEAT ALB . . . repeats all tracks in the current (for MP3 only) album 3 4 1 To select your play mode, press the SHUFF or REPEAT on the remote control before or during playback until the display shows the desired function. [. . . ] 40 dB SPEAKERS Bass reflex system Dimensions (w x h x d). . . . 150 x 150 x 200 (mm) GENERAL INFORMATION AC Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 ­ 230 V / 50Hz Dimensions (w x h x d) . . 150 x 150 x 244 (mm) Weight (with/without speakers) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]