User manual PHILIPS MCM177

[. . . ] Micro Hi-Fi System MCM177 Register your product and get support at www. philips. com/welcome User manual Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 3 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] The system will switch to the selected source. To switch the system to standby mode Press STANDBY ON on the system (or 2on the remote control). The display displays clock time, or --: -- is displayed if clock time is not set. The volume level (up to a maximum volume level of 12 and up to a minimum level of 4), interactive sound settings, last selected source and tuner presets will be retained in the player's memory. To switch the system to Eco-power standby mode Press and hold STANDBY ON (y on the remote control) for more than 2 seconds. The Eco power light will be on. Press LOUD on the remote control to enable/ disable LOUDNESS feature. LOUDNESS feature enables the system to automatically increase the treble and bass sound effect at low volume (the higher the volume, the lower the treble and bass increase). 5 Press MUTE on the remote control to interrupt sound reproduction instantly. Playback will continue without sound. To activate sound reproduction you can: ­ press MUTE again; ­ adjust the volume controls; ­ change source. Power-saving automatic standby The power-saving feature automatically switches to standby 15 minutes after a CD/USB playback has ended and no control is operated. 14 CD/MP3 Operation To select a different track Press í/ ë once or repeatedly until the desired track number appears in the display. To find a passage within a track 1 Press and hold down on TUNING à / á (on the remote control à / á). The disc is played at high speed and low volume. When you recognise the passage you want, release TUNING à / á (on the remote control à / á). To playback the beginning of each track 2 IMPORTANT: The lens of the CD player should never be touched. Press INTRO on the remote control to play first 10 seconds of each track in sequence. To interrupt playback Press 2; during playback. The display freezes and the elapsed playing time flashes when playback is interrupted. Notes: CD play will also stop when; ­ the CD door is opened. ­ you select another source: USB, FM or AUX. ­ you select standby. Loading a disc This CD player plays Audio Discs including CDRecordables, CD-Rewritables and MP3 CD. CD-ROM, CD-I, CDV, VCD, DVD or computer CDs, however, are not possible. DRM-protected WMA disc is not supported. 1 2 Select CD source. Press OPEN/CLOSE0 on the top of the system to open the CD compartment. OPEN is displayed when you open the CD compartment. Insert a disc with the printed side facing up and press down on OPEN/CLOSE0 to close the CD door. [. . . ] Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Cleaning the disc lens After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. 21 English Troubleshooting English 22 WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. [. . . ]