User manual PHILIPS MCM207

[. . . ] Register your product and get support at www. philips. com/welcome MCM207/12 EN User manual DA Brugervejledning DE Benutzerhandbuch ES Manual del usuario FR Mode d'emploi IT Manuale utente NL Gebruiksaanwijzing SV Användarhandbok KO Adjust volume level Select a preset sound effect 16 16 16 16 17 17 17 17 17 17 18 18 18 18 19 19 20 20 20 22 1 Important Safety Notice 4 4 5 Enhance bass Mute sound 2 Your Micro System Introduction What's in the box Overview of the main unit Overview of the remote control 8 Record 7 7 7 7 9 11 11 11 11 12 12 13 13 13 13 13 14 14 14 14 15 15 15 15 15 Record from CD to tape Record a section of a disc to tape Record from radio to tape Record from USB Record from external audio devices 3 Get started Connect speakers Connect power Install remote control batteries Set clock Turn on 9 Use more of your Micro System Set the sleep timer Set the alarm timer Listen through headphone 10 Product information Specifications Supported MP3 disc formats USB playability information Maintenance 4 Play Play disc Play from USB Play tape Listen to an external device 11 Troubleshooting 5 Play options Repeat and random play Program tracks Display play information 6 Listen to the radio Tune to a radio station Program radio stations automatically Program radio stations manually Select a preset radio station EN 3 English Contents 7 Adjust sound 16 1 Important Safety Important Safety Instructions a Read these instructions. g Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] Then the hour digits are displayed and begin to blink. Note · In Eco Power Standby mode, press CLOCK to show clock first, then press and hold CLOCK to proceed clock setting. In standby mode, press and hold for more than 2 seconds. » The backlight on the display panel turns off. Note · If no button is pressed over 15 minutes in Standby mode, the unit goes to Eco Power Standby mode automatically and the backlight on the display turns off. 2 3 4 5 6 Press on the main unit repeatedly to select 12 hour or 24 hour format. » The minute digits are displayed and begin to blink. Press CLOCK to confirm. Turn on 1 Press STANDBY-ON on the main unit. » The apparatus switches to the last selected source. 12 EN 4 Play Play disc 1 Press CD to select the disc source. 3 Insert a disc with the printed side facing up, then close the disc tray. · · · · · . To pause/resume play, press To stop play, press . album, press To skip to a track, press / . To search within a track, press and hold / . Release to resume normal play. 3 Press USB/MP3 LINK to select the USB source. · For MP3/WMA files: to select an album, press . Repeat steps 2 to 3 to program more tracks. » During play, [PROG] (program) is displayed. · · To erase the program, in the stop position, press . To review the program, in the stop position, press and hold PROG for more than 2 seconds. 14 EN Note · You can program a maximum of 20 FM radio stations and 10 MW radio stations. Tune to a radio station Note · For optimal reception, fully extend and adjust the position of the FM antenna. 1 2 3 Tune to a radio station. » [PROG] (program) blinks on the display. Press to allocate a number (1 to 20) to this radio station, then press PROG to confirm. » The preset number and the frequency of the preset station are displayed. Repeat the above steps to program other stations. Note · 1 2 Press TUNER to select the tuner source. Press and hold / for more than 2 seconds. » The radio tunes to a station with strong reception automatically. 4 3 Repeat step 2 to tune to more stations. · To tune to a weak station, press / repeatedly until you find optimal reception. · To overwrite a programmed station, store another station in its place. Program radio stations automatically Note · You can program a maximum of 20 FM radio stations and 10 MW radio stations. Select a preset radio station 1 In tuner mode, press to select a preset number. 1 In tuner mode, press and hold PROG for 2 seconds to activate automatic program mode. [. . . ] · Ensure that there is power at the AC outlet. · To save power, the system switches off automatically 15 minutes after track play reaches the end and no control is operated. No sound or poor sound · Adjust the volume. · Check that the speakers are connected correctly. [. . . ]