User manual PHILIPS MCM275/37B

[. . . ] Micro Hi-Fi System MCM275 Thank you for choosing Philips. Philips vous remercie de votre confiance. Gracias por escoger Philips Need help fast? Read your Quick Use Guide and/or Owner's Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at Besoin d'une aide rapide? Les Guide d'utilisation rapide et Manuel de l'utilisateur regorgent d'astuces destinées à simplifier l'utilisation de votre produit Philips. Toutefois, si vous ne parvenez pas à résoudre votre probléme, vous pouvez accéder à notre aide en ligne à l'adresse Necesita ayuda inmediata? Lea primero la Guía de uso rápido o el Manual del usuario, en donde encontrará consejos que le ayudarán a disfrutar plenamente de su producto Philips. Si después de leerlo aún necesita ayuda, consulte nuestro servicio de asistencia en línea en www. philips. com/support or call www. philips. com/support ou formez le www. philips. com/support o llame al teléfono 1-888-PHILIPS (744-5477) while with your product. 1-800-661-6162 (Francophone) 1-888-PHILIPS (744-5477) (English speaking) Veillez à avoir votre produit à portée de main. 1-888-PHILIPS (744-5477) y tenga a mano el producto. Philips MCM275 Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] To replace the remote controls' battery Setting the clock After connecting MCM275 to the power supply, set the clock first. 1 Press and hold STANDBY-ON to switch the set to Standby mode The display shows the set time -- --:-- -- flashes by default if you have not set the clock 2 In the standby mode, press and hold DISPLAY/ CLOCK on the remote control SET CLOCK scrolls on the display 24 HR or 12 HR appears for the initial clock setting. To select 24-hour clock or 12-hour clock, On the remote control, press VOLUME +/once or more (or turn VOLUME on the set) On the remote control, press DISPLAY/ CLOCK to confirm The hours digits start flashing 3 Hold down or press VOLUME +/- repeatedly to set the hours (or turn VOLUME on the set) 1 2 3 4 Press and hold 1 as indicated. Simultaneously, pull the battery tray at 4. Remove the old batter y and put a new CR2025 battery in place. Put back the battery tray. 4 5 6 2 1 Press DISPLAY/CLOCK to confirm The minutes digits start flashing Hold down or press VOLUME +/- repeatedly to set the minutes (or turn VOLUME on the set) Press DISPLAY/CLOCK to confirm ­ To exit without storing the clock setting press STOP 9 Helpful hints: ­ The clock setting will be erased when the system is disconnected from the power supply. ­ The set will exit from the clock setting mode if no button is pressed within 90 seconds. CAUTION!­ Remove the battery if it is exhausted or will not be used for a long time. ­ Batteries contain chemical substances, so they should be disposed of properly. L IT H IU M 3 5 CR 20 2 / USB 16 Basic Functions Switching on/off the set and selecting functions 1 To switch on, press STANDBY-ON or SOURCE on the set (or y on the remote control) The set switches to the last source selected OR On the remote control, press the source button (e. g. USB, CD, TUNER, AUX) When the set is on, press STANDBY-ON to switch off (or y on the remote control) To select your function, press SOURCE once or more on the set (or USB, CD, TUNER, AUX on the remote control) Helpful hints: ­ In the standby/Eco power mode, the tone, sound settings, tuner presets and the volume level (up to a maximum volume level of 20) will be retained in the set's memory. 2 3 Auto-standby When the set has reached the end of CD playback and remains in the stop position for more than 15 minutes, the set will switch off automatically to save power. / USB Helpful hints: ­ You can also switch on the set by pressing CD OPEN · CLOSEç Switching between Standby and ECO POWER mode 1 When the set is switched off, press and hold STANDBY-ON to switch between Standby and ECO POWER mode (or y on the remote control) In ECO POWER mode (power-saving mode): ECO PWR scrolls on the display The display is switched off The Red indicator lights up In Standby mode: The clock is displayed 17 English Basic Functions English Volume control Volume adjustment Adjust the volume by using the VOLUME rotary on the set or by pressing VOLUME +/on the remote control VOL and the actual value (between 1 and 31) are displayed VOL MIN is the minimum volume level VOL MAX is the maximum volume level Sound control DSC Digital Sound Control enables you to select predefined sound settings. Press DSC repeatedly to select the desired sound setting: ROCK, JAZZ, POP, CLASSIC / USB DBB Press DBB (Dynamic Bass Boost) once or more to switch bass enhancement on or off. DBB appears if DBB is activated 1 2 MUTE You can temporarily switch off the sound without switching off the set. Press MUTE on the remote control to switch off the sound MUTE appears. Playback continues without sound To switch on the sound, you can: ­ press MUTE again; ­ adjust the volume controls; ­ change source Displaying the clock During playback, press DISPLAY/CLOCK on the remote control repeatedly to switch between the clock display and the playback display. Notes: ­ When playing MP3 files, you will get track information (ID3 tag) by pressing DISPLAY/ CLOCK. 18 CD Discs for playback With this system, you can play ­ all pre-recorded audio CDs (CDDA) ­ all finalized audio CD-Rs and CD-RWs ­ MP3/WMA-CDs (CD-Rs/CD-RWs with MP3/WMA files) IMPORTANT!­ Make sure that the file names of MP3 files end with . mp3. ­ For DRM protected WMA files, use Windows Media Player 10 (or later) for CD burning/ conversion. microsoft. com for details about Windows Media Player and WM DRM (Windows Media Digital Rights Management). Playing discs 1 IMPORTANT!­ This system is designed for regular discs. Therefore, do not use any accessories such as disc stabilizer rings or disc treatment sheets, etc. Press SOURCE once or more to select CD (or CD on the remote control) The CD icon appears Press CD OPEN·CLOSEç to open the CD compartment. OPEN is displayed 2 About MP3/ WMA The music compression technology MP3 (MPEG1 Audio Layer 3) and WMA (Windows Media Audio) significantly reduces the digital data of an audio CD while maintaining CD quality sound. Windows Media Audio® is a registered trademark of Microsoft Corporation. Supported formats: ­ Disc format ISO9660, Joliet, UDF (created on Adaptec Direct CD) and multi-session CDs ­ MP3 bit rate (data rate): 32-320 Kbps and variable bit rate ­ Directory nesting up to a maximum of 8 levels ­ Max. track number plus album: 500 ­ WMA v9 or earlier The system will not play or support the following: · Empty albums: an empty album is an album that does not contain MP3/WMA files, and will not be shown in the display. [. . . ] COVERAGE: (If this product is determined to be defective) LABOR: For a period of one (1) year from the date of purchase, Philips will repair or replace the product, at its option, at no charge, or pay the labor charges to the Philips authorized repair facility (see warranty service phone numbers in next column). After the period of one (1) year, Philips will no longer be responsible for charges incurred. PARTS: For a period of one (1) year from the date of purchase, Philips will supply, at no charge, new or rebuilt replacement parts in exchange for defective parts. Philips authorized repair facility will provide removal and installation of the part under the specified labor warranty. [. . . ]