User manual PHILIPS MCM276R

[. . . ] Micro Hi-Fi System MCM276R Thank you for choosing Philips. Philips vous remercie de votre confiance. Gracias por escoger Philips Need help fast? Read your Quick Use Guide and/or Owner's Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at Besoin d'une aide rapide? Les Guide d'utilisation rapide et Manuel de l'utilisateur regorgent d'astuces destinées à simplifier l'utilisation de votre produit Philips. Toutefois, si vous ne parvenez pas à résoudre votre probléme, vous pouvez accéder à notre aide en ligne à l'adresse Necesita ayuda inmediata? Lea primero la Guía de uso rápido o el Manual del usuario, en donde encontrará consejos que le ayudarán a disfrutar plenamente de su producto Philips. Si después de leerlo aún necesita ayuda, consulte nuestro servicio de asistencia en línea en www. philips. com/usasupport or call www. philips. com/usasupport ou formez le www. philips. com/usasupport o llame al teléfono 1-888-PHILIPS (744-5477) while with your product. [. . . ] If the cover is open, do not look at the beam. You run the risk of getting an electric shock. The machine does not contain any userserviceable parts. Modification of the product could result in hazardous radiation of EMC or other unsafe operation. 15 English Preparation English Using the remote control IMPORTANT!­ Remove the protective plastic tab before using the remote control. ­ Always point the remote control directly towards IR area. Notes for remote control: ­ First select the source you wish to control by pressing one of the source select keys on the remote control (for example CD, TUNER). ­ Then select the desired function (for example ÉÅ, 4 , ¢). To replace the remote controls' battery Setting the clock After connecting MCM276R to the power supply, set the clock first. 1 Press and hold STANDBY-ON to switch the set to Standby mode The display shows the set time -- --:-- -- flashes by default if you have not set the clock 2 In the standby mode, press and hold DISPLAY/ CLOCK on the remote control SET CLOCK scrolls on the display 24 HR or 12 HR appears for the initial clock setting. To select 24-hour clock or 12-hour clock, On the remote control, press VOLUME +/once or more (or turn VOLUME on the set) On the remote control, press DISPLAY/ CLOCK to confirm The hours digits start flashing 3 Hold down or press VOLUME +/- repeatedly to set the hours (or turn VOLUME on the set) 1 2 3 4 Press and hold 1 as indicated. Simultaneously, pull the battery tray at 4. Remove the old batter y and put a new CR2025 battery in place. Put back the battery tray. 4 5 6 2 1 Press DISPLAY/CLOCK to confirm The minutes digits start flashing Hold down or press VOLUME +/- repeatedly to set the minutes (or turn VOLUME on the set) Press DISPLAY/CLOCK to confirm ­ To exit without storing the clock setting press STOP 9 Helpful hints: ­ The clock setting will be erased when the system is disconnected from the power supply. ­ The set will exit from the clock setting mode if no button is pressed within 90 seconds. CAUTION!­ Remove the battery if it is exhausted or will not be used for a long time. ­ Batteries contain chemical substances, so they should be disposed of properly. L IT H IU M 3 5 CR 20 2 / 16 Basic Functions Switching on/off the set and selecting functions 1 To switch on, press STANDBY-ON or SOURCE on the set (or y on the remote control) The set switches to the last source selected OR On the remote control, press the source button (e. g. USB, CD, TUNER, DOCK) When the set is on, press STANDBY-ON to switch off (or y on the remote control) To select your function, press SOURCE once or more on the set (or USB, CD, TUNER, DOCK on the remote control) Helpful hints: ­ In the standby/Eco power mode, the tone, sound settings, tuner presets and the volume level (up to a maximum volume level of 20) will be retained in the set's memory. 2 3 Auto-standby / When the set has reached the end of CD playback and remains in the stop position for more than 15 minutes, the set will switch off automatically to save power. Helpful hints: ­ You can also switch on the set by pressing CD OPEN · CLOSEç Switching between Standby and ECO POWER mode 1 When the set is switched off, press and hold STANDBY-ON to switch between Standby and ECO POWER mode (or y on the remote control) In ECO POWER mode (power-saving mode): ECO PWR scrolls on the display The display is switched off The Red indicator lights up In Standby mode: The clock is displayed 17 English Basic Functions English Volume control Volume adjustment Adjust the volume by using the VOLUME rotary on the set or by pressing VOLUME +/on the remote control VOL and the actual value (between 1 and 31) are displayed VOL MIN is the minimum volume level VOL MAX is the maximum volume level Sound control DSC Digital Sound Control enables you to select predefined sound settings. Press DSC repeatedly to select the desired sound setting: ROCK, JAZZ, POP, CLASSIC / DBB Press DBB (Dynamic Bass Boost) once or more to switch bass enhancement on or off. DBB appears if DBB is activated 1 2 MUTE You can temporarily switch off the sound without switching off the set. Press MUTE on the remote control to switch off the sound MUTE appears. Playback continues without sound To switch on the sound, you can: ­ press MUTE again; ­ adjust the volume controls; ­ change source Displaying the clock During playback, press DISPLAY/CLOCK on the remote control repeatedly to switch between the clock display and the playback display. [. . . ] Wait until the moisture condensation at the lens has cleared. Replace or clean the disc, see "Maintenance". Use a finalised CD-RW or a correct MP3/WMA -CD format disc. Some files on the USB device are not displayed. Check if the number of folders exceeds 99 or the number of titles exceeds 999 If the signal is too weak, adjust the antenna or Radio reception is poor. connect an external antenna for better reception. Increase the distance between the Micro HiFi System and your TV or VCR. [. . . ]