User manual PHILIPS MCM395

[. . . ] Micro Hi-Fi System Register your product and get support at MCM395 www. philips. com/welcome Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Italia DICHIARAZIONE DI CONFORMITA' Si dichiara che l'apparecchio MCM395 Philips risponde alle prescrizioni dell'art. Fatto a Eindhoven Philips Consumer Electronics Philips, Glaslaan 2 5616 JB Eindhoven, The Netherlands 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. [. . . ] To view the clock time in Standby mode, press and hold ECO POWER/STANDBY ON 2 for 3 seconds or more. The system enters the normal standby mode with clock display. Press and hold ECO POWER/STANDBY ON 2 for 3 seconds or more to go back to Eco Power Standby mode. Press DSC repeatedly to select the desired sound effect : POP, JAZZ, CLASSIC or ROCK. Press DBB to switch on or off the bass enhancement. If the DBB is activated, DBB oN is shown. If the DBB is deactivated, DBB oFF is shown. 14 CD/MP3-CD Operations To interrupt playback Press É . Å To resume playback, press É again. Å To stop playback Press Ç. Notes: ­ Disc play will also stop when you select another source or the disc has reached the end. ­ For MP3 disc, the disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc. Text display IMPORTANT!The lens of the CD player should never be touched. X During CD playback Press DISPLAY repeatedly to see the following information. Track number and elapsed playback time of current track. Track number and remaining playback time of current track. Track number and total elapsed playback time. Track number and total remaining playback time. During MP3-CD playback Press DISPLAY repeatedly to select three display modes : Track, Album and ID3. ID-3 The ID-3 tag scrolls (if any). Discs for playback This system is able to play : ­ All pre-recorded audio CDs ­ All finalised audio CDR and audio CDRW discs ­ MP3-CDs (CD-ROMs with MP3 tracks) CD-ROM, CD-I, CDV, VCD, DVD or computer CDs, however, are not possible. Playing a disc 1 2 3 Select CD source. Press OPEN/CLOSE 0 on the front panel to open the CD compartment. Insert a disc with the printed side facing up and press OPEN/CLOSE 0 to close the CD door. "READING" is displayed as the CD player scans the contents of a disc, and then the total number of tracks and playing time (or the total number of albums and tracks for MP3 disc) are shown. Å Selecting a different track Press TUNING S / T repeatedly until the desired track number appears in the display. If playback is stopped, pressÉ to start Å playback. 4 15 English CD/MP3-CD Operations English Finding a passage within a track 1 2 Press and hold down on TUNING S / T. [. . . ] Cleaning Discs When a disc becomes dirty, clean it with a cleaning cloth. Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Cleaning the disc lens After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. [. . . ]