User manual PHILIPS MCM510

[. . . ] Fix new fuse which should be a BS1362 5 Amp, A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. if the mains plug contains a fuse , this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. [. . . ] Press and hold ECO POWER/STANDBYON 2 for 3 seconds or more to go back to Eco Power Standby mode. press DSC repeatedly to select the desired sound effect : OPTIMAL , ROCK , JAZZ or POP. Press DBB/INCREDIBLE SURROUND to switch on or off the surround sound effect or bass enhancement. If both the DBB and IS are activated, DBB INCREDIBLE SURROUND scrolls. Note: ­ The effect of INCREDIBLE SURROUND may vary with different types of music. Notes: ­ Disc play will also stop when you select another source or the disc has reached the end. ­ For MP3 disc, the disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc. The lens of the CD player should never be touched. Track number and elapsed play time of current track. Total number of tracks played and total elapsed time. Total remaining number of tracks and total remaining play time. in MP3-CD mode Press BAND/DISPLAY repeatedly to select four display modes : Number , Track , Album and ID3. Number The current album and track numbers are displyed briefly. Track The current track name scrolls twice. This system is able to play : ­ All pre-recorded audio CDs ­ All finalised audio CDR and audio CDRW discs ­ MP3-CDs (CD-ROMs with MP3 tracks) CD-ROM, CD-I, CDV, VCD, DVD or computer CDs, however, are not possible. "READING" is displayed as the CD player scans the contents of a disc, and then the total number of tracks and album are shown. Press TUNING S/T (¡/TM) repeatedly until the desired track number appears in the display. Finding a passage within a track 1 2 When you recognize the passage you want, release TUNING S/T ( à/á on the remote control). Up to 20 tracks can be stored in the memory in any order. Press TUNING S/T (¡/TM) repeatedly to select your desired track number. To start playback of your disc programme, press Ç followed byÉÅ. You can select and change the various play modes before or during playback. [. . . ] At the very beginning and end of the tape, no recording will take place during the 7 seconds when the leader tape passes the recorder heads. To protect a tape from accidental erasure, have the tape in front of you and break out the left tab. Recording on this side is no longer possible. If, however, you wish to record over this side again, cover the tabs with a piece of adhesive tape. [. . . ]