User manual PHILIPS MCM530

[. . . ] Mini Hi-Fi System MCM530 IM Need help?Call us! Philips representatives are ready to help you with any questions about your new product. We can guide you through Connections, First-time Setup, or any of the Features. We want you to start enjoying your new product right away! RTAN PO Return your Warranty Registration Card within 10 days EE WH T! CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT! Y INS ID 1-800-531-0039 or Visit us on the web at www. philips. com E S Canada English: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Français: Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des Communications du Canada. CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. ATENCIÓN El uso de mando o ajustes o la ejecucción de métodos que no sean los aquí descritos puede ocasionar peligro de exposición a radiación. PHILIPS MCM530 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Philips Consumer Electronics North America P . O. Box 14810 Knoxville, TN 37914-1810 Phone no. : 1-800-531-0039 This system complies with the FCC rules, Part 15 and with 21 CFR 1040. 10. [. . . ] ­ The system will exit clock setting mode if no button is pressed within 90 seconds. Demonstration mode If the demonstration mode is active, whenever you switch the system to the Eco Power standby or standby mode, it will begin showing the various features offered by the system. To activate the demonstration In Eco Power standby/standby mode, press and hold Ç on the main unit for 5 seconds until "DEMO ON" is displayed. To deactivate the demonstration Press and hold Ç on the main unit for 5 seconds until "DEMO OFF" is displayed. 17 English Basic Operations English 18 Selecting different display modes Dim mode You can select the desired brightness for the display panel. In any active mode, press DIM repeatedly to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode. DIM is shown, except for DIM OFF mode. DIM mode DIM OFF DIM 1 DIM 2 DIM 3 Button illumination on on on off Display brightness full full half half Spectrum analyser on off on off Sound control You are only able to select one of the sound controls at a time : MAX sound, DSC or VEC. MAX sound MAX sound provides the best mixture of various sound features (DSC, VEC for example). Press MAX SOUND (or MAX ON /OFF on remote). If activated, MAX is shown and the MAX SOUND button lights up. All other sound effects (DSC or VEC) will be switched off automatically If MAX SOUND is activated together with Philips Sound Agent 2, the PRESET and REVERB sound effect will be switched automatically to Neutral and No Environment modes respectively. Digital Sound Control DSC provides a different type of preset sound equaliser setting. Press DSC repeatedly to select: OPTIMAL, JAZZ, ROCK or POP. Virtual Environment Control VEC provides a different type of environmentbased equaliser setting. Press VEC repeatedly to select: HALL, CINEMA, CONCERT or CYBER. Note: ­ Pressing DIM button in standby mode will toggle between half and full brightness. Clock display mode You can choose to show the clock display only. Press CLOCK· TIMER (or CLOCK on remote control). In any active mode, pressing the button again will resume normal display. Note: ­ If you pressed any buttons in the clock display mode, the display will briefly show the information related to the selected mode. Volume control Adjust MASTER VOLUME (or press VOL +/- on remote) to increase or decrease the sound level. "VOL MUTE" is the minimum volume level and "0 dB" is the maximum volume level. To switch off the volume temporarily Press MUTE on the remote. Playback will continue without sound and "MUTE" is displayed. To restore the volume, press MUTE again or increase the volume level. Disc Operations IMPORTANT!­ This system is designed for regular discs. [. . . ] · product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Philips. · reception problems caused by signal conditions or cable or antenna systems outside the unit. · a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. · incidental or consequential damages resulting from the product. [. . . ]