User manual PHILIPS MCM530-37B

[. . . ] Mini Hi-Fi System MCM530 IM Need help?Call us! Philips representatives are ready to help you with any questions about your new product. We can guide you through Connections, First-time Setup, or any of the Features. We want you to start enjoying your new product right away! RTAN PO Return your Warranty Registration Card within 10 days EE WH T! CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT! Y INS ID 1-800-531-0039 or Visit us on the web at www. philips. com E S Canada English: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Français: Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des Communications du Canada. CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. ATENCIÓN El uso de mando o ajustes o la ejecucción de métodos que no sean los aquí descritos puede ocasionar peligro de exposición a radiación. PHILIPS MCM530 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Philips Consumer Electronics North America P . O. Box 14810 Knoxville, TN 37914-1810 Phone no. : 1-800-531-0039 This system complies with the FCC rules, Part 15 and with 21 CFR 1040. 10. [. . . ] Philips Sound Agent 2 will be automatically launched if USB PC Link is selected. Press DSC/PRESET or VEC/REVERB to select different Preset or Reverb sound effect. For more details about using Philips Sound Agent 2 features on your PC, please refer to the User Manual in the supplied CD-ROM or the Help menu. Notes: ­ Philips Sound Agent 2 minimum OS requirement: Windows 2000 or XP. ­ Please refer to the CD-ROM sleeve for detailed installation procedures, OR `Software installation' in this manual. 1 2 3 16 Basic Operations Switching on /off Switching to active mode Press CD, TUNER, AUX or USB PC LINK. Switching to Eco Power standby mode Press B. Switching to standby mode (view clock) Press and hold B. While in the standby mode, pressing CLOCK·TIMER will switch the system to the Eco Power standby mode. Note: ­ Before switching the system to the Eco Power standby or standby mode, make sure the demonstration mode has been deactivated. Setting the clock The clock can be set in either 12-hour or 24-hour mode ("11:59 PM" or "23:59" for example). 4 (00:00 / 12:00AM) 1 3 (00:00 / 12:00AM) 2 (00:00 î 12:00AM) 1, 5 1 Press and hold CLOCK on the remote until the time flashing on the display. OR Press and hold CLOCK·TIMER on the main unit until "SELECT CLOCK OR TIMER" is displayed. Then press ë to change the display to "CLOCK" and press CLOCK·TIMER again to confirm. 2 3 4 5 Press PROGRAM (PROG) repeatedly to change between 12-hour and 24-hour clock mode. Press à or á repeatedly to set the hour. Press í or ë repeatedly to set the minute. Press CLOCK (or CLOCK·TIMER) to store the setting. Notes: ­ The clock setting will be erased when the system is disconnected from the power supply. ­ The system will exit clock setting mode if no button is pressed within 90 seconds. Demonstration mode If the demonstration mode is active, whenever you switch the system to the Eco Power standby or standby mode, it will begin showing the various features offered by the system. To activate the demonstration In Eco Power standby/standby mode, press and hold Ç on the main unit for 5 seconds until "DEMO ON" is displayed. To deactivate the demonstration Press and hold Ç on the main unit for 5 seconds until "DEMO OFF" is displayed. 17 English Basic Operations English 18 Selecting different display modes Dim mode You can select the desired brightness for the display panel. In any active mode, press DIM repeatedly to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode. DIM is shown, except for DIM OFF mode. DIM mode DIM OFF DIM 1 DIM 2 DIM 3 Button illumination on on on off Display brightness full full half half Spectrum analyser on off on off Sound control You are only able to select one of the sound controls at a time : MAX sound, DSC or VEC. MAX sound MAX sound provides the best mixture of various sound features (DSC, VEC for example). Press MAX SOUND (or MAX ON /OFF on remote). [. . . ] Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Auto Installation of the Installer CD-ROM did not install the Philips Sound Agent 2 onto my PC. When in USB PC LINK mode, "NO CONNECTION" is displayed. Solution Check that your PC's Operating System is running on Windows 2000/XP. I want the minimum effect from the Philips Sound Agent 2 sound mode when listening to MP3 music streaming via USB PC Link. [. . . ]