User manual PHILIPS MCM7

[. . . ] Micro Hi-Fi System MCM7 · MCM8 AUDIO IM Need help?Call us! Philips representatives are ready to help you with any questions about your new product. We can guide you through Connections, First-time Setup, or any of the Features. We want you to start enjoying your new product right away! RTAN PO Return your Warranty Registration Card within 10 days EE WH T! CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT! Y INS ID 1-800-531-0039 or Visit us on the web at www. philips. com MCM7 MCM8 E S 1 Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. · Once your Philips purchase is registered, you're eligible to receive all the privileges of owning a Philips product. · So complete and return the Warranty Registration Card enclosed with your purchase at once, and take advantage of these important benefits. Warranty Verification Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your Philips warranty. Owner Confirmation Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss. Model Registration Returning your Warranty Registration Card right away guarantees you'll receive all the information and special offers which you qualify for as the owner of your model. Know these safety symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN For Customer Use Enter below the Serial No. [. . . ] Improper connections may damage the system due to short-circuit. ­ Do not connect more than one speaker to any one pair of +/- speaker terminals. 1 2 1 Open the battery compartment cover. 2 Insert two batteries type R06 or AA, following the indications (+-) inside the compartment. 3 Close the cover. Using the remote control to operate the system Step 3: Connecting the AC power cord 1 Aim the remote control directly at the remote sensor (iR) on the main unit. "AUTO INSTALL ­ PRESS PLAY" may appear on the display panel when the AC power cord is plugged into the power outlet for the first time. Press É on the main unit to store all available Å radio stations or press Ç to exit (refer to "Tuner Operations". ) 2 Select the source you wish to control by pressing one of the source select keys on the remote control (for example CD, TUNER. ) 3 Then select the desired function (for example É , í, ë. ) Å CAUTION! ­ Remove batteries if they are exhausted or will not be used for a long time. ­ Do not use old and new or different types of batteries in combination. ­ Batteries contain chemical substances, so they should be disposed of properly. 13 Basic Operations Switching on /off Switching to an active mode Press CD, TUNER, TAPE or AUX. Switching to Eco Power standby mode Press B. ECO POWER button lights up. The display screen will go blank. PROGRAM Setting the clock The clock can be set in either 12-hour or 24-hour mode ("11:59 PM" or "23:59" for example. ) English 2 (00:00 î 12:00AM) 4 Switching to standby mode (view clock) Press and hold B. CLOCK (00:00 / 12:00AM) (00:00 / 12:00AM) 3, 4 1, 5 The clock appears. While in standby mode, pressing CLOCK button will switch the system to Eco Power standby mode. Helpful Hint: ­ Before switching the system to Eco Power standby or standby mode, make sure you have deactivated the the demonstration mode. 1 Press and hold CLOCK until the clock time starts flashing. 2 Press PROGRAM repeatedly to change between 12-hour and 24-hour clock mode. 3 Press à or á repeatedly to set the hour. 4 Press É to change to minutes setting, then Å press à or á repeatedly to set the minutes. Demonstration mode If the demonstration mode is active, whenever you switch the system to Eco Power standby or standby mode, it will begin showing the various features offered by the system. 5 Press CLOCK again to store the setting. The clock will start working. To view the clock time in any active mode Press CLOCK once. The clock is displayed for a few seconds. Helpful Hints: ­ The clock setting will be erased when the system is disconnected from the power supply. ­ The system will exit clock setting mode if no button is pressed within 90 seconds. To activate the demonstration In Eco Power standby/standby mode, press and hold Ç on the main unit until "DEMO ON" appears. To deactivate the demonstration Press and hold Ç on the main unit until "DEMO OFF" appears. 14 Basic Operations You can select the desired brightness for the display panel. Incredible Surround The Incredible Surround magnifies the virtual distance between the front speakers for an incredibly wide, enveloping, stereo effect. In any active mode, press DIM repeatedly to select DIM 1, DIM 2, DIM 3 or DIM OFF display. DIM shows on the display screen, except DIM OFF mode. Press INC. repeatedly. If activated, INCREDIBLE SURROUND shows on the display. If deactivated, "IS OFF" appears. Volume control Bass/Treble Adjust MASTER VOLUME (or press VOL +/- on remote) to increase or decrease the sound level. "VOL MUTE" is the minimum volume level and "0 dB" is the maximum volume level. The BASS (low tone) and TREBLE (high tone) feature enables you to define the soundprocessor settings. To switch off the volume temporarily Press MUTE on the remote. Adjust BASS or TREBLE (or press BASS +-/TREBLE +- on the remote) repeatedly to select the desired Bass or Treble level. "BASS XX" or "TREBLE XX" appears. "XX" denotes the level as follows : -3 TM -2 . . . TM 0 TM 1. . . TM +2 TM +3 . . . Playback will continue without sound and "MUTE" appears. To restore the volume, press MUTE again or increase the volume level. Natural (flat sound) This feature allows you to temporarily switch off the sound setting (e. g. Incredible Surround - OFF, Bass/Treble setting - 0dB. ) Press NATURAL on the remote. Pressing the same button will restore the previous sound setting. [. . . ] · product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Philips. · reception problems caused by signal conditions or cable or antenna systems outside the unit. · a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. · incidental or consequential damages resulting from the product. [. . . ]