User manual PHILIPS MCM700

[. . . ] Micro Hi-Fi System MCM700 User manual Manuel d'utilisation Manual del usuario Benutzerhandücher Gebruikershandleidingen Manuale per l'utente Användarhandböckerna Brugermanual Käyttöoppaita Manual do usuário Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Italia DICHIARAZIONE DI CONFORMITA' Si dichiara che l'apparecchio MCM700 Philips risponde alle prescrizioni dell'art. Fatto a Eindhoven Philips Consumer Electronics Philips, Glaslaan 2 5616 JB Eindhoven, The Netherlands 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. [. . . ] Track number and total remaining playback time. In MP3-CD mode Press DISPLAY on the remote control to display the ID-3 information if available. Loading a disc This CD player plays Audio Discs including CD Recordables, CD-Rewritables and MP3 CD. CD-ROM, CD-I, CDV, VCD, DVD or computer CDs, however, are not possible. 1 2 Press SOURCE on the top of the system to select CD or press CD on the remote. OPEN is displayed when the compartment cover slides up. 15 English 3 CD/MP3-CD Operation English To find a passage within a track 1 2 Playing an MP3 disc 1 Load an MP3 disc. The disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc. Press ALBUM +/- on the remote to select a desired album. Press the control knob on the front panel to the left or right (corresponding to S/T) or press ¡ / TM on the remote to select a desired track. The album number will change accordingly as you reach the first track of an album by pressing S (¡ on the remote) or the last track of an album by pressing T (TM on the remote). Press ÉÅ to start playback. Supported MP3 disc formats: ­ ISO9660, Joliet ­ Maximum title number: 512 (depending on filename length) ­ Maximum album number: 255 ­ Supported sampling frequencies: 32 kHz, 44. 1kHz, 48 kHz ­ Supported Bit-rates: 32~256 (kbps), variable bitrates Press and hold the control knob on the front panel to the left or right (corresponding to S/T) or press 5 /6 on the remote. When you recognize the passage you want, release the control knob (5 /6 on the remote). To interrupt playback Press ÉÅ during playback. The display freezes and the elapsed playing time flashes when playback is interrupted. To resume, press ÉÅ again. Notes: CD play will also stop when; ­ the CD door is opened. ­ you select another source: FM, USB or AUX. To scan all tracks in a disc Press INTRO on the remote to play the first 10 seconds of each track in the whole disc one by one. The playback will start from the first track of the current disc. To stop scanning Press INTRO on the remote again until INTRO disappears. 4 16 CD/MP3-CD Operation Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. The REPEAT modes can also be combined with PROGRAM. Programming track numbers Program in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to 20 tracks can be stored in the memory. 1 To select your play mode, press SHUFFLE or REPEAT on the remote control before or during playback until the display shows the desired function. [. . . ] Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs When a disc becomes dirty, clean it with a cleaning cloth. Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Cleaning the disc lens After prolonged use, dirt or dust may accumulate at the disc lens. [. . . ]