User manual PHILIPS MCM761

[. . . ] Register your product and get support at www. philips. com/welcome MCM761 EN User manual DA Brugervejledning DE Benutzerhandbuch ES Manual del usuario 3 19 35 53 FR Mode d'emploi IT Manuale utente 71 89 107 125 NL Gebruiksaanwijzing SV Användarhandbok Contents 1 Important Safety Notice 4 4 5 6 6 6 7 8 9 9 10 10 10 11 11 11 11 11 11 12 12 12 12 13 13 13 13 13 13 13 14 7 Adjust sound Adjust volume level Bass and treble Mute sound Incredible surround Listen through headphone 2 Your Micro Hi-Fi System Introduction What's in the box Overview of the main unit Overview of the remote control 14 14 14 14 14 14 14 14 15 15 15 15 16 16 16 16 16 16 17 17 17 18 8 USB record Record from CD to USB 3 Get started Connect FM antenna Connect MW antenna Connect speakers Connect power Prepare the remote control Auto install radio stations Set clock Turn on 9 Record to tape 10 Other features Set the alarm timer Set the sleep timer Listen to an external device Delete from USB device Adjust display brightness Demonstrate the unit's features 4 Play Play disc Play USB Play tape 11 Product information USB playability information Supported MP3 disc formats Maintenance 5 Disc/USB play options Repeat and random play Program tracks Display play information 12 Troubleshooting 6 Listen to radio Tune to a radio station Program radio stations automatically Program radio stations manually Select a preset radio station FM stations with RDS EN 3 English 1 Important Safety a Read these instructions. g Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, that produce heat. [. . . ] The model number and serial number are on the back of the apparatus. ___________________________ Connect FM antenna 1 Connect the supplied FM antenna to the FM jack on the back of the main unit. EN 9 Connect MW antenna 1 Assemble the MW loop antenna. 2 Insert the stripped part of the wire completely. Insert the right speaker wires to " R", left speaker wires to "L". Insert the red wires "+", black wires to "-". 3 2 Connect the MW loop antenna to the MW jack on the back of the main unit. a b c Connect power Connect speakers Caution For optimal sound, use the supplied speakers only. Connect only speakers with impedance that is the same or higher than the supplied speakers. manual. Caution Risk of product damage!Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit. Before connecting the AC power cord, ensure you have completed all other connections. Note Note Ensure that the colors of the speaker wires and terminals are matched. The type plate is located on the back of the main unit. 1 1 If the socket is closed, push the socket Connect the AC power cable to: the main unit. the wall socket. 10 EN Prepare the remote control Caution Risk of explosion!Keep batteries away from heat, CLOCK to activate the clock setting mode. 2 3 4 5 6 Press PROGRAM repeatedly to select 12 hour or 24 hour format. Press DISPLAY/CLOCK To replace the remote control battery: 1 2 3 Open the battery compartment. Insert 2 AA batteries with correct polarity (+/-) as indicated. Close the battery compartment. 3 1 2 Turn on 1 Press . » The unit switches to the last selected source. Switch to standby 1 Note If you are not going to use the remote control for a long time, remove the batteries. Do not use old and new or different types of batteries in combination. Batteries contain chemical substances, so they should be disposed of properly. Press to switch the unit to standby mode. » The clock (if set) appears on the display panel. To switch the unit to Eco Power Standby mode: 1 Press and hold for more than 2 seconds. » The backlight on the display panel turns off. Auto install radio stations When you connect power and no radio stations are stored, the unit automatically begins to store radio stations. » [AUTO INSTALL - PRESS PLAY] (auto install - press the PLAY button) is displayed. 4 Play Play disc 1 Press CD to select the disc source. 2 Press OPEN/CLOSE on the main unit to open the disc compartment. 2 Press on the main unit to start installation. » The unit automatically stores radio » When all the available radio stations is broadcast automatically. 3 4 Insert a disc with the printed side facing up, then close the disc tray. To select another track, press / . EN 11 English Set clock 1 In the standby mode, press DISPLAY/ To select an album, press ALBUM /. [. . . ] Follow the instructions supplied with cleaner. Remote control does not work Before you press any function button, remote control instead of the main unit. Reduce the distance between the remote control and the unit. Insert the batteries with their polarities (+/­ signs) aligned as indicated. Aim the remote control directly at the sensor on the front of the main unit. [. . . ]