User manual PHILIPS MICRO AUDIO SYSTEM MCW770

[. . . ] Wireless PC Link Micro MCW770 MCW770 Custom Installation Contents Manual installation of the driver for the wireless USB adapter, the Philips Media Manager software and the network setup ___________ 2 Installation of an additional audio system or recovery if audio system PC link settings are lost ________ 3­4 Installation of an additional PC server or recovery of PC link settings on your PC __________________ 4­5 Integration of MC W770 into an existing (home) network _______ 6­9 Network utilities _______________ 10­13 Check connection ______________10 Change of USB port using the MC W770 _________________ 10­11 Change of the wireless channel ___12­13 Using a different wireless network adapter ______________________ 14­19 Custom Installation English Wireless PC link Custom installation Beside the Quick installation there are also Custom installation menus for setting up more complex configurations. Please use this kind of installation only if you are experienced in setting up networks with additional options: ­ Integration of MC W770 into an existing network ­ Add an additional audio system ­ Add an additional PC server Manual installation of the driver for the wireless USB adapter, the Philips Media Manager software and the network setup These 3 installation steps perform the same functionality and have the same behaviour as the quick installation (see "Quick installation") in a single piece, except for the following additional window, which will appear during the network setup: Do not select Do not perform automatic setup for this type of installation as this is necessary only to integrate the MC W770 into an existing network as described later. Just click on Next to proceed. 2 Wireless PC link Custom Installation English 3 Installation of an additional audio system or recovery if audio system PC link settings are lost If you want to add an additional MC W770 or an equivalent audio system into your existing MC W770 network, you can connect them to the same PC server without changing the settings of the current PC link installation. This procedure can also be used when the PC link settings have been lost on the audio set. 1 Select Add additional Audio System in the Custom Installation menu and click on Install. 2 The PC checks the PC link configuration and the following window appears: Click on Next to continue. 3 After some time the following window will appear: Custom Installation English Wireless PC link 4 Press PC LINK A on the additional audio system for at least 5 seconds until INSTALLING is scrolled on the set. [. . . ] as offered on the market, because they may cause jamming of the changer mechanism. 2) Do not load more than one disc into one disc tray. 3) CDs encoded with copyright protection technologies by some record companies may be unplayable by this product. 3 Load a disc with the printed side up. For double sided discs, load the side you want to play facing down. 4 Press OPEN/CLOSE / again on the unit to close the tray. The tray is closed and CD 1 (or 2, 3, 4, 5) and READING are displayed. If an unfinalised disc is inserted DISC NOT FINALIZED will be displayed. CD 1 (or 2, 3, 4, 5), the total number of tracks and the total playing time of the disc are displayed. MP3-CD only: CD 1 (or 2, 3, 4, 5) and READING are displayed. Due to the large number of tracks this could take up to 2 minutes. The current album number and the first track number are displayed. If no album has been found A00 will be displayed. 0 To load further discs into the other trays repeat steps 1­4. Note: Only one tray can be opened at a time. If a tray is opened and you try to open another, the already opened tray will be closed first before the other tray opens. 23 English Playback Playing discs Direct selection and playback of one particular disc CD TUNER AUX PC LINK 2 Press É to start playback. Å English CD1 CD4 CD2 CD5 VOL CD3 Playback starts from the first track of the current disc. If one of the trays is empty, the next available disc will be selected. CD 1 (or 2, 3, 4, 5), the current track number and elapsed playing time are displayed. A flashing CD symbol indicates the active disc tray. To stop playback Press one of the disc keys DISC 1, DISC 2, DISC 3, DISC 4, or DISC 5 on the unit or CD 1, CD 2, CD 3, CD 4, or CD 5 on the remote control to start playback of the desired disc in the selected tray. CD 1 (or 2, 3, 4, 5), the current track number and elapsed playing time are displayed. A flashing CD symbol indicates the active disc tray. Playback of all loaded discs REPEAT PROGRAM SHUFFLE DISPLAY SLEEP CLOCK TIMER TIMER ON/OFF Press STOP Ç to stop playback. If no key is pressed for 30 minutes the unit will switch to standby. CD TUNER AUX PC LINK CD1 CD4 CD2 CD5 CD3 REPEAT PROGRAM SHUFFLE DISPLAY SLEEP CLOCK TIMER TIMER ON/OFF VOL ALBUM BROWSE Interrupting and resuming playback 1 Press É during playback to interrupt Å playback. [. . . ] · Product repair and/or part replacement because of improper installation, connections to improper voltage supply, abuse, neglect, misuse, accident, unauthorized repair or other cause not within the control of Philips. · A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. · Damage occurring to product during shipping when improperly packaged or cost associated with packaging. · Product lost in shipment and no signature verification of receipt can be provided. [. . . ]