User manual PHILIPS MICRO HI-FI SYSTEM MC145

[. . . ] Micro Hi-Fi System MC145 Thank you for choosing Philips. Philips vous remercie de votre confiance. Gracias por escoger Philips Need help fast? Read your Quick Use Guide and/or Owner's Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at Besoin d'une aide rapide? Les Guide d'utilisation rapide et Manuel de l'utilisateur regorgent d'astuces destinées à simplifier l'utilisation de votre produit Philips. Toutefois, si vous ne parvenez pas à résoudre votre probléme, vous pouvez accéder à notre aide en ligne à l'adresse Necesita ayuda inmediata? Lea primero la Guía de uso rápido o el Manual del usuario, en donde encontrará consejos que le ayudarán a disfrutar plenamente de su producto Philips. Si después de leerlo aún necesita ayuda, consulte nuestro servicio de asistencia en línea en www. philips. com/support or call www. philips. com/support ou formez le www. philips. com/support o llame al teléfono 1-888-PHILIPS (744-5477) while with your product. [. . . ] Display shows: the selected track number. Repeat steps 1-2 to select and store all desired tracks. FULLis displayed if you attempt to programme more than 20 tracks. To start playback of your disc programme, press 2;. Notes: ­ If you wish, you can add further tracks to your current program. Make sure you are in the STOP position, and that you have not exceeded 20 tracks. ­ Display shows NOSE if there is no track selected. 1 To select your play mode, press PLAYMODE (SHUFFLE or REPEAT on the remote control) before or during playback until the display shows the desired function. Press 2; to start playback if in the STOP position. If you have selected SHUFFLE, playback starts automatically. To return to normal playback, press PLAYMODE (SHUFFLE or REPEAT on the remote control) until the various SHUFFLE/ REPEAT modes are no longer displayed. 3 2 4 3 You can also press STOP 9 to cancel your play mode. Erasing the programme You can erase the programme by: pressing 9 once in the STOP mode; pressing 9 twice during playback; opening the CD compartment; Select another sound source PROG disappears from the display. 15 English Different play modes: SHUFFLE and REPEAT Programming track numbers Radio Reception Programming radio stations You can store up to a total of 20 (10 FW and 10 AM) radio stations in the memory. Automatic programming Automatic programming will start with a chosen preset number 1. From this preset number upwards, former programmed radio stations will be overridden. English 1 Press STOP/BAND (on the set) or TUNER (on the remote control) once or more to select your waveband. Press PRESET G / H (3 / 4 on remote control) to select the preset number where programming should start. Note: ­ If no preset number is selected, default is preset (1) and all your presets will be overridden. 2 Tuning to radio stations 1 2 Select TUNER source. Press STOP/BAND (on the set) or TUNER (on the remote control) once or more to select your waveband. Press on TUNING ¡1 or 2TM and release button. The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning Srch. Repeat step 3 if necessary until you find the desired station. 3 3 Press PROG for more than 2 seconds to activate programming. AUto is displayed and available stations are programmed in order of waveband reception strength. Manual programming 4 1 2 3 Tune to your desired station (see Tuning to radio stations). Press PRESET G / H (3 / 4 on remote control) to select a number from 1 to 10 for FM (or 1 to 10 for AM) to this station. [. . . ] Note: Any product sold and identified as refurbished or renewed carries a ninety (90) day limited warranty. Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay. WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS: This Limited Warranty applies only to the new products manufactured by or for Philips that can be identified by the trademark, trade name, or logo affixed to it. [. . . ]