User manual PHILIPS MICRO SYSTEMS MZ3C-37L

[. . . ] Once your Philips purchase is registered, you're eligible to receive all the privileges of owning a Philips product. ⷠSo complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your Philips warranty. [. . . ] Fast searches back and forward within a track; skips to subsequent/ beginning of a current track or previous track Tuner: . Connects to a CD-(RW) system for digital CD recording, or another system for alternative sound output ^ AC MAINS. After all other connections have been made, connect the power cord to the wall outlet. Adjusts the volume level and sound settings; adjusts the hour and minutes for the clock/ timer functions OPEN/CLOSE . Not available on this version VOLUME ­, + . Plays CD tracks in random order PROGRAM CD: . Select the desired sound source first (e. CD, CD R), then press the required function key (e. The CD function keys on the remote control can be used for a CD R. Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure Open the battery compartment and insert two batteries, type AA, R06 or UM3 (preferably alkaline) with the correct polarity as indicated by the + and ­ symbols inside the compartment. Remove the batteries if they are dead or if the unit is not to be used for a long time. 1 Check if the power supply, as shown on the type plate located on the bottom of the set, corresponds to your local power supply. If it does not, consult your dealer or service center. 2 If your set is equipped with a voltage selector on the bottom of the set, adjust the selector so that it matches with the local power supply. 3 Connect the power cord to the wall outlet and the set is now ready for use. 4 To disconnect the set from the power supply completely, remove the plug from the wall outlet. After more than 24 hours no controls are operated. Do not expose the set, batteries, CDs or cassettes to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight. To clean the set, use a soft, slightly dampened chamois leather. Do not use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the housing. When headphones are inserted into the headphone jack the speakers are disconnected. We have done our utmost to make the packaging easy to separate into three mono-materials: cardboard (box), expandable polystyrene (buffer), polyethylene (bags, protective foam). [. . . ] TM AUTO is displayed and available stations are programmed in order of waveband reception strength: FM followed by AM. 3 Press PRESET 4 or 3 (¡ or TM on the remote control) to allocate a number from 1 to 40 to this station. Sudden changes in the surrounding temperature can cause condensation to cloud over on the lens of your CD player. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates. [. . . ]