User manual PHILIPS MINI-CDR-FWR8R

[. . . ] And we'll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Philips "family, " you're entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. What's more, your purchase guarantees you'll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network. And most importantly you can count on our uncompromising commitment to your total satisfaction. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Note: If a program was already available before pressing COPY CD, this will be ignored. PROG goes off and the current disc will be recorded. After finishing the recording, PROG is shown and the program is available again. Finalizing a CDR(W) disc is a simple procedure, necessary to: ­ play a recorded CDR on a standard CD player or ­ play a recorded CDRW on a CDRW compatible CD player and CD recorder. 17 INTERNAL RECORDING ANALOG DIGITAL / AUX STANDBY ON TUNER CD 1 iR SEN SOR CD 2 CD 3 CD TEX CK T CLO /TIM 5 Press YES to confirm your selection. yBoth decks will be selected in the display, the arrow starts blinking. The remaining recording time of the CDR(W), the total recording time of the CDR(W) and either Record CD1 (or 2, 3)?, Record Prog?Note: When the CDR(W) already contains a recording, ALC will also become active and ALC will be shown. English DISPLAY MIC LEVEL MIC ING CD -TEXT EDIT OPEN/C LOSE DER CD RECOR CDR 6 Press YES to start high speed recording. yThe arrow lights, RECORDING IN PROGRESS is shown, high speed recording starts and the actual recording time remaining starts to count down. · To stop recording, press Ç STOP on the unit. RECORD R MASTE E VOLUM COPY CD COMPILE CD Normal recording and listening REC TYP E CD ERASE FINALIZE CD EDIT Normal recording and listening of an entire disc, a track, a program or a track edit 1 Make sure the CDR(W) is absolutely free of scratches and dust particles. 2 Follow steps 2 and 3 of "High speed recording". High speed recording High speed recording of an entire disc, a track, a program or a track edit 1 Make sure the CDR(W) is absolutely free of scratches and dust particles. 2 Press either CD 1, CD 2 or CD 3 to select the disc from which you wish to record. yThe arrow lights, RECORDING IN PROGRESS is shown, manual recording starts and the actual recording time remaining starts to count down. 6 Press Ç STOP to stop recording. Manual microphone recording 1 Make sure the CDR(W) is absolutely free of scratches and dust particles. 2 Set MIC LEVEL to the minimum level to prevent acoustic feedback (e. g. a loud howling sound) before you connect the microphone. 3 Connect a microphone to MIC. 19 EXTERNAL RECORDING ANALOG DIGITAL / AUX STANDBY ON TUNER CD 1 iR SEN SOR 6 Start playback on the selected source. yThe CD recorder starts to record simultaneously and RECORDING IN PROGRESS is shown. The remaining recording time on the CDR(W) is displayed. /TIMER English DISPLAY MIC LEVEL MIC CD 2 CD 3 CD TEX CK T CLO Note: If you start playback on the selected source within a track, recording starts at the beginning of the next track or after 2. 7 seconds of silence in analog recordings. 7 If a digital source is selected: After the recording process, the CD recorder stops automatically. Note: Recordings from DAT or DCC will automatically stop after 20 seconds of silence. If an analog source is selected: At the end of the recording process, the CD recorder stops after a silence of 20 seconds on the source material. [. . . ] No correct digital source is detected after starting recording. Does not record CDR(W) is scratched or dirty. Recording process is interrupted (power loss, mechanical shock). Recorded disc does not play The inserted CDR(W) is not finalized. [. . . ]