User manual PHILIPS MINI HI-FI SYSTEM WITH 3 CD CHANGER FWC150

[. . . ] which is located on the rear of the cabinet. Retain this information for future reference. _______________________________ Serial No. ________________________________ 2 t s This "bolt of lightning" indicates uninsulated material within your unit may cause an electrical shock. [. . . ] 3 Press the CD (CD 1·2·3) button to select the disc. 4 Press PREV í or NEXT ë to select the desired track. · Repeat steps 3 to 5 to store other discs and tracks. 6 Press STOP·CLEAR Ç once to end programming mode. TM The total number of tracks programmed and total playing time appear on the display. 1 Press PLAY É to start program playback. TM "PLAY PROGRAM" appears on the display. TM The track number and elapsed playing time of the current track will appear on the display. · If you press REPEAT during program playback, the current track will be played repeatedly. TM The REPEAT and PROGRAM flags will be displayed. 2 Press STOP·CLEAR Ç to stop program playback. Note: ­ If you press any of the CD DIRECT PLAY buttons, the system will play the selected disc or track and the stored program will be ignored temporarily. The PROGRAM flag will also temporarily disappear from the display and then reappear when the playback for the selected disc ends. Reviewing the program Reviewing of the program is only possible in the stop mode. · The track will now be played repeatedly until you press STOP·CLEAR Ç. 2 Press REPEAT again to resume normal playback. TM The REPEAT flag disappears from the display. Easy Set EASY SET allows you to store all available radio stations in a particular band (FM or AM) automatically. · Press and hold STANDBY·ON (on the system only) for 5 seconds; when the system is in standby or demonstration mode. TM "EASY SET" will be displayed and followed by "TUNER". TM EASY SET will start with the last active band. TM All available radio stations with sufficient signal strength will be stored or until 40 presets are filled. Notes: ­ When EASY SET is used, all previously stored radio stations will be erased. ­ The last preset radio station will appear on the display when EASY SET is completed. v v v v v n NEXT ·MAX TUNER 1 Press TUNER to select TUNER mode. A few seconds later, the current frequency is displayed. 2 Press TUNER (BAND) again to select the desired waveband : FM or AM. 3 Press TUNING à or á for more than one second, then release. [. . . ] TM Check the speaker connections and location. Lack of bass sound or apparently imprecise physical location of musical instruments. · Speakers are connected wrongly. TM Check the speaker connection for proper phasing, red/ black wires to red/black terminals. [. . . ]