User manual PHILIPS MINI HI-FI SYSTEM WITH 3 CD CHANGER FWC500

[. . . ] which is located on the rear of the cabinet. Retain this information for future reference. _______________________________ Serial No. ________________________________ t s 2 This "bolt of lightning" indicates uninsulated material within your unit may cause an electrical shock. [. . . ] · Repeat steps 3 to 5 to store other discs and tracks. TM The total number of tracks programmed and total playing time appear on the display. English 17 Loading the CD Changer Playing a CD Selecting a desired track Programming Tracks Note: ­ All the available discs will play once, then stop. Disc Change You can change the outer two discs while the third inner disc is stopped or is playing. 2 Replace the discs in the left and right disc trays. · If you press DISC CHANGE again during playback, the CD will stop playing. TM The CD carousel will rotate until the inner tray is rotated out and is ready for loading. 3 Press OPEN·CLOSE to close the CD compartment. Note: ­ To ensure good system performance, wait until the CD changer completely reads the disc(s) before proceeding. CD Direct Play You can play a CD directly by pressing the DISC 1, DISC 2 or DISC 3 button. The CD player will stop at the end of playback of the selected disc. ­ A lit button indicates that a disc is loaded in the disc tray. Searching for a particular passage during playback · Press and hold SEARCH S or T (or à / á on the remote control) until the desired passage is located. · Play returns to normal when SEARCH S or T is released. Notes: ­ If the total playing time is more than "99:59" or if one of the programmed tracks has a number greater than 30, then "--:--" appears on the display instead of the total playing time. CD ­ During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically. Notes: ­ If you press any of the CD DIRECT PLAY buttons, the system will play the selected disc or track and the stored program will be ignored temporarily. TM The track number and elapsed playing time of the current track will appear on the display. · If you press REPEAT during program playback, the current track or all programmed tracks will be played repeatedly. TM "TRACK" or "PROGRAM" will be displayed. TM The REPEAT and PROGRAM flags will be displayed. 2 Press STOP to stop program playback. Erasing the program (when playback is stopped) · Press STOP. TM "PROGRAM CLEARED" will be displayed. Note: ­ The program will be erased when the system is disconnected from the power supply or when the CD carousel is opened. If the CD carousel is opened, the tracks belonging to the outer two trays will be erased and the display will show "TRACKS CLEARED". Note: ­ REPEAT DISC mode will be cancelled when shuffle is selected. Notes: ­ REPEAT DISC mode is not available during program play or shuffling mode. ­ You can also repeat shuffling a program. TM "REPEAT TRACK" or "REPEAT PROGRAM" will be displayed. TM The REPEAT, PROGRAM and SHUFFLE flags appear on the display. TUNER CD CHANGER NEWS DIM T. A. [. . . ] · The disc is inserted upside down. · Moisture condensation at the lens. TM Wait until lens has adjusted to normal room temperature. · There is no disc in the CD tray. [. . . ]