User manual PHILIPS MINI HI-FI SYSTEM WITH 3 CD CHANGER FWC550

[. . . ] which is located on the rear of the cabinet. Retain this information for future reference. _______________________________ Serial No. ________________________________ t s This "bolt of lightning" indicates uninsulated material within your unit may cause an electrical shock. [. . . ] Note: ­ Pressingí during shuffling can only skip to the beginning of the current track. Programming Tracks Programming tracks of a loaded CD is possible when playback is stopped. The display will indicate the total tracks stored in the program. Up to 40 tracks can be stored in the memory in any order. When 40 tracks are stored and you attempt to store another track, the display will show "PROGRAM FULL". 1 Load the desired discs in the disc trays. TM It will cancel any previously selected repeat mode. 3 Press the CD (CD 1·2·3) or DISC 1/2/3 button to select the disc. 4 Pressí or ë to select the desired track. · Repeat steps 3 to 5 to store other discs and tracks. Reviewing the program Reviewing of the program is possible only when playback is stopped. · Pressí or ë repeatedly to review the programmed tracks. · Press Ç to exit review mode. Erasing the program (when playback is stopped) · Press Ç. · To tune to a weak station, briefly press à or á repeatedly until the display shows the desired frequency and/or when the best reception has been obtained. pg 01-28/C1-C10/37-En 16 16/11/1999, 1:56 PM v 1 Press REPEAT on the remote control to select the various repeat modes. TM "TRACK", "DISC", "ALL DISC" or "OFF" will be displayed. · The selected track, selected disc or all available discs will now be played repeatedly until you pressÇ. 2 Press REPEAT until the "OFF" mode is displayed to resume normal playback. TM The REP flag disappears from the display. CD1 · 2 · 3 CD v v FM · AM TUNER v v TAPE 1 · 2 TAPE v VIDEO AUX MASTER VOLUME PRESET ZZ NEXT RO 3139 116 19292 (ENG) 17 Storing Preset Stations You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display. Automatic programming 1 Press TUNER (FM·AM). 2 Press PROGRAM for more than one second. TM The PROG flag starts flashing and "AUTO" will be displayed. TM The system will search for every available station in the FM waveband first, then search the AM waveband. TM All available stations will be stored automatically. [. . . ] · Speakers are connected wrongly. TM Check the speaker connections and location. Lack of bass sound or apparently imprecise physical location of musical instruments. · Speakers are connected wrongly. [. . . ]