User manual PHILIPS MRD120-17B

[. . . ] V E RY S M A RT. MRD120 DVD VIDEO DIGITAL SUROUND SYSTEM Return your Warranty Registration Card within 10 days Congratulations on purchasing this Magnavox product. We've included everything you need to get started. If you have any problems, Magnavox Representatives can help you get the most from your new product by explaining: · Hookups, · First Time Setup, and · Feature Operation. Do not attempt to return this product to the store. I Read this manual first! PORTAN M T! S EE W H Y IN S I DE For fast help, call us first! [. . . ] If repeat mode is active, pressing S / T will replay the same track/chapter. Searching backward/forward q Press and hold S / T, then press ÉÅ to resume normal playback. While searching, pressing and holding S / T again will increase the search speed. Resuming playback from the last stopped point (DVD/VCD/CD) q When play is stopped and the disc has not been ejected, press RESUME. To cancel the resume mode q When play is stopped, press Ç again. Helpful Hints: ­ Open the disc tray or disconnect the DVD system from the power supply will cancel the resume option. ­ For VCD disc, pressing RESUME button will turn off the PBC mode and playback will start from the beginning. TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 21 001-037-MRD120-37-Eng 21 18/03/2004, 02:19 PM 8239 300 30533 Disc Operations Selecting various repeat functions Repeat play mode q While playing a disc, press REPEAT to select various repeat mode. "REPEAT" icon will appear on the display, except REPEAT OFF mode. DVD CHAPTER REPEAT ON TM TITLE REPEAT ON TM REPEAT-OFF VCD/SVCD/CD REPEAT-ONE (repeat the current track) TM REPEAT-ALL TM REPEAT-OFF MP3 REPEAT-ONE TM REPEAT-ALBUM TM REPEAT-ALL TM REPEAT-OFF Helpful Hint: ­ For VCD, repeat playback is not possible if the PBC mode is switched on. Repeating a section within a chapter / track Program favorite tracks (audio CDs and VCDs) You can play the contents of the disc in the order you want by programming the order of the tracks to be played. Up to 99 tracks can be stored. 1 Stop playback, then press PROG on the front panel to enter program mode. 2 Use the numeric keypad (0-9) to enter a valid track number. "FULL" will appear if you have programmed 99 tracks. 3 Press OK to store the track. 4 Repeat steps 2~3 to select other tracks. 5 Press ÉÅ to start program playback. 6 Press Ç to stop playback or exit program mode. Clearing the program q Stop playback, then press the Ç again. Helpful Hints: ­ If the DVD system is disconnected from the power supply, it will erase the program. ­ For VCD, the program option is only possible if the PBC mode is turned off. 1 While playing a disc, press REPEAT A-B at the starting point. 2 Press REPEAT A-B again at the point to end the section. The section A and B can be set only within the same chapter/track. The section will now repeat continuously. 3 Press REPEAT A-B again to resume normal playback. TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 22 001-037-MRD120-37-Eng 22 18/03/2004, 02:19 PM 8239 300 30533 Disc Operations Using the menu bar to program IMPORTANT!You have to turn on your TV and set to the correct Video In channel. [. . . ] This system can convert the interlaced video from DVD into progressive format when the DVD Player is connected to a Progressive Scan TV. It dramatically increases the vertical resolution and provides the best picture. Region code: A system allowing discs to be played only in the region designated. This unit will only play discs that have compatible region codes. [. . . ]