User manual PHILIPS MRD300

[. . . ] V E RY S M A RT. Printed in China MRD300 First connect . . . Front Speaker (Right) Center Speaker Front Speaker (Left) Rear of TV (example only) AM Loop Antenna Passive Subwoofer FM Antenna Rear Speaker (Surround Right) Rear Speaker (Surround Left) Helpful Hints To obtain a better picture quality effect, you can choose to connect an extra video connection if your TV has the same input connector: A or B. 1 PUSH OUT Use this video cable(s) If your TV has this video input jack(s) 2 PUSH IN A COMPONENT VIDEO IN Connecting Speaker Cable B not supplied S-VIDEO IN If your TV has only a single Antenna In jack, you will need an ANTENNA IN accessory RF modulator. The RF modulator converts the video from the DVD system so it can play through the TV's Antenna connector. Refer to your owner's manual for proper connection (refer to page 9 in the owner's manual. ) . . . then play (see next page) When listening to TV programs, press TV·AUX button at the front panel of the DVD system to select `AUDIO IN-TV' in order for the sound to be heard. [. . . ] 1G ­ General Audience; recommended as acceptable for viewers of all ages. Helpful Hint: ­ Some DVDs are not encoded with a rating though the movie rating is printed on the disc jacket. The rating level feature does not work for such discs. keypad (0-9) to enter your old 4-digit password in the box beside the `OLD PASSWORD. ' (If this is the first time you have set a password, press 1234. ) `XXXX' will appear as you enter the numbers. PLEASE ENTER OLD PASSWORD 6 Enter a new 4-digit password of your choice in the box beside `NEW PASSWORD. ' 7 Enter the new 4-digit password once again in the box beside `CONFIRM PASSWORD, ' then press OK. 8 To close the menu, press SETUP again PREPARATIONS Disc Operations IMPORTANT!­ DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc is for the same zone as your player. ­ Depending on the DVD or VIDEO CD, some operations may be different or restricted. ­ Do not push on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the disc player to malfunction. ­ Do not move the disc player during playback, as doing so may damage the DVD system. Maximum up to 5 discs could be loaded in the disc carousel tray. 6 Press OPEN·CLOSE 0 again to close the tray. There will be a short delay while the player identifies all the available discs and reads the menu from the disc. 7 Playback may start automatically, if not, press É . Å G Some discs will start playing automatically, and others will display the Disc Contents Menu on the TV screen. If the menu is presented, use 1 234 keys to highlight your selection and press OK to confirm. To select a play option, press numeric keypad (0-9, >10. ) Helpful Hints: ­ Your player will not play discs that have a region code different from the region code of your player. ­ If the inhibit icon appears on the TV screen when a button is pressed, it means the function is not available on the disc you are playing. Playable discs Your DVD player is able to play : ­ Digital Video Discs (DVDs) ­ Video CDs (VCDs) ­ Super Video CDs (SVCDs) ­ Digital Video Discs + Rewritable (DVD+RW) ­ Compact Discs (CDs) ­ MP3 discs, Picture (Kodak, JPEG) files on CD-R(W). Basic playback controls É Å ­ Starts playback or pause. ­ Resumes playback of a stopped disc (DVD only. ) Ç ­ Stops playback. Region Codes DVDs must be labeled for ALL regions or for Region 1 in order to play on this DVD system. You cannot play discs that are labeled for other regions. ALL S (í) ­ Skips to the previous track/chapter. T (ë) ­ Skips to the next track/chapter. à ­ Starts Fast reverse scanning. Press É to resume Å normal playback. á ­ Starts Fast forward scanning. Press É to resume Å normal playback. numeric keypad (0-9, >10) ­ Selects the title, chapter or track number of the disc to start playback. [. . . ] · reception problems caused by signal conditions or cable or antenna systems outside the unit. · a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. · incidental or consequential damages resulting from the product. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. [. . . ]