User manual PHILIPS MRD500VR-17B

[. . . ] then play (see next page) AV IN DVD VIDEO DIGITAL SURROUND SYSTEM PROGRESSIVE SCAN PLAY·PAUSE OPEN·CLOSE PREV STOP PROGRAM NEXT SOURCE STANDBY ON VOLUME 3 Make sure your DVD system and TV are connected and turned on! 4 CH ANN EL 3 1 Playing a disc 2 1 4 5 Press DISC on the remote control. You can also press the SOURCE button on the front panel until "DISC" appears on the display panel. 2 3 4 5 Turn on the TV and select the correct Video In mode. You should see the blue Philips DVD background screen on the TV (if no disc in the DVD system). Press OPEN·CLOSE 0 on the front of the DVD system and load a disc, then press the OPEN·CLOSE 0 again to close the disc tray. Make sure the disc label is facing up. For double-sided discs, load the side you want to play face up. Playback will start automatically. Å If a disc menu appears, use 3 4 1 2 buttons on the remote to make the necessary selection, then press OK to confirm. Or, use the numeric keypad on the remote to select features. [. . . ] Å To stop playback G Press Ç. Skipping to another track/chapter G Press S or T repeatedly during playback to skip backward or forward. Each press will take the disc to the beginning of the current or next track/chapter. Region Codes DVDs must be labeled for ALL regions or for Region 1 in order to play on this DVD system. You cannot play discs that are labeled for other regions. ALL 1 Helpful Hint: ­ If the REPEAT TRACK mode is active, pressing S or T will replay the same track/chapter. To skip to the beginning of the current track/ chapter during playback G Press S once. To go directly to any track/chapter G Use the numeric keypad (0-9) to enter the number of the desired track/chapter. Helpful Hint: ­ If you are having trouble playing a certain disc, remove the disc and try a different one. Improperly formatted discs will not play on this DVD system. Fast Search within a track/chapter 1 Hold down S or T about two seconds to fast reverse or forward the disc. 2 To resume normal play, pressÉ . Å DISC OPERATIONS 17 English Basic playback Continue playback from the last stop point G In stop mode and when a disc has not been removed, press RESUME on the remote to resume playback from the point at which it stopped. To cancel the resume mode G Press Ç again. Helpful Hints: ­ Open the disc tray or disconnect the system from the power supply will cancel the resume option. ­ For VCD, the resume option is only possible if the PBC mode is turned on. ­ The resume option may not be available on some discs. Program favorite tracks You can play the contents of the disc in the order you want by programming the order of the tracks to be played. From the left, PROGRAM 4 Press S or T to view the previous/next page (if available). 5 Press 341 2 to move within the menu and press OK to select the desired picture to play. 6 PressÉ will start the slide-show playback. Å During playback, you can; G Press S / T to select another title/picture in the current folder. G Use 1 2 3 4 keys on the remote to rotate or flip the picture files. G Press ÉÅ to pause/resume playback. If the MP3-CD menu is switched off G You can only play the existing selected title by pressing É button. While in playback mode, press S / T to Å select the previous/ next title. The title number will appear. IMPORTANT!Some operations may be different or restricted, depending on the disc format. Refer to the jacket or case of the disc you are playing. 1 In disc mode, press SYSTEM MENU. The menu bar will appear across the top of the TV screen. 2 Press 1 or 2 to move through the menu bar. 3 Press 4 to select the highlighted icon and use 34 keys to select your preferred option. 4 Press OK to confirm a highlighted selection. 5 To exit, press SYSTEM MENU or OK. DISC OPERATIONS 19 English Playing MP3/Picture disc (Kodak, JPEG) Notes: ­ Due to the recording nature of Digital Audio MP3 (DAM), only digital audio music will play. [. . . ] For one year thereafter, a defective or inoperative product will be replaced with a new, renewed, or comparable product at no charge to you. A replacement product is covered only for the original warranty period. When the warranty on the original product expires, the warranty on the replacement product also expires. Your warranty does not cover: · labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product. [. . . ]