User manual PHILIPS MX1060D

[. . . ] DVD/CD PLAYER DIGITAL A/V SURROUND RECEIVER SURROUND SURROUND RECEIVER RECEIVER DVD MX-1050D MX-1060D 1 Important Note Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Remove fuse cover and fuse. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] It is also compatible with stereo systems but the user will only have two channels (Front Left & Right) of sound. Muting the sound 1 Press MUTE to mute the speaker output, the "MUTE" icon will appear on the display. Dolby 3 Stereo Dolby 3 Stereo produces sound through three speaker channels (front left, centre, front right) from a two channel analogue signal. It is not a surround format, so it does not require surround speakers. 2 To restore the volume, press MUTE again. Dimming the display screen 1 Press DISPLAY will dim the display by a third. 2 Press DISPLAY again will dim the display by another third. 3 Press DISPLAY the third time will return the display to the original brightness. Stereo All sound is reproduced and played through the front left and right speakers. This enables standard stereo reproduction. 14 BASIC FUNCTIONS Soundfield Effects The digital Soundfield Effects can recreate the effects of sounds reflected from walls or ceilings to obtain the sound presence of real environments. STADIUM This mode recreates a large stadium effect using very long reverberation times. STAGE This effect recreates a stage environment, emphasizing sound from the front speakers. HALL The surround effect recreates a hall using lots of reflections. Suitable for orchestral music such as classical and opera. DISCO This surround effect generates a feeling of being in a disco or club. It is suitable for all types of music that are played in discos. LIVE This soundfield effect is suitable for all types of music. BASIC FUNCTIONS 15 English Tuner English Manual tuning 1 Press TUNER to select tuner mode. 4 Press ( / ) (or numeric keys 0-9 on the remote control) 5 to select the desired preset channel number to store. Press PRESETS again to store the radio station. After 2 seconds, the display will show the current waveband and frequency. q Repeat steps 2­5 to store other preset radio stations. Selecting Preset Radio Stations 1 In tuner mode, press TUNER to switch between FM and 2 To switch between FM and MW waveband, press TUNER again. MW waveband. 2 Press PRESETS and followed by FREQUENCY 4 or 3 3 Press FREQUENCY 4 or 3 (or à / á on the remote control) repeatedly to change the frequency. The frequency changes in 50kHz steps in FM and 9kHz steps in MW waveband. (or ( / ) on the remote control) to select the desired preset station. q You can also use the remote control's direct access numeric keys. Automatic tuning 1 Press TUNER to select tuner mode. 2 To switch between FM and MW waveband, press TUNER again. RDS IMPORTANT!RDS functions are only available in areas that use the RDS system. RDS (Radio Data System) is a broadcasting service that allows FM stations to send additional information along with the regular FM radio signal. This additional information can contain the following : ­ Station Name ­ Radio Text ­ Programme Type ­ Frequency 3 Press and hold FREQUENCY 4 or 3 for more than one second to activate auto tuning mode. When a station is reached, auto tuning stops. q Repeat steps 2­3 to search for other radio stations. Tuning to a weak FM station 1 Press FREQUENCY 4 or 3 repeatedly to tune in the weak FM station manually. 2 Press FM MODE (Ç) to switch to mono mode. This should reduce the noise and make the station easier to hear. Displaying RDS data When an RDS radio station is received, the RDS icon ( Ç ) and station name (if available) will appear on the display. While receiving an RDS radio station, you can change the display information by pressing RDS DISPLAY on the remote control repeatedly. Preset Radio Stations When a preset station is selected, the preset number will appear shortly and the display will show the waveband and frequency. Storing Preset Radio Stations You can store up to 20 stations in the FM waveband and 20 stations in the MW waveband in the memory. 1 In tuner mode, press TUNER to switch between FM and 2 3 MW waveband. Press FREQUENCY 4 or 3 to tune in the desired station. Press and hold PRESETS until "PRESET" icon flashes. Note: ­ If the tuned station is not transmitting an RDS signal or not an RDS station, "NO PS" will be displayed. 16 TUNER Searching for RDS radio stations using Programme Type The following programme types exist and can be received by your Radio Tuner : NEWS, AFFAIRS, INFO, SPORTS, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M, ROCK M, MOR M, LIGHT M, CLASSICS, OTHERS M, etc. . 1 To automatically search for an RDS programme type, first 2 select FM radio mode. [. . . ] 3" full range, 1" piezo Dimensions (w x h x d) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 mm x 155 mm x 88 mm Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 45 kg Centre Speaker System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-way shielded Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]