User manual PHILIPS MX2791B

[. . . ] For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet. 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. [. . . ] Stopping playback G Press Ç. Resuming playback from the last stopped point (DVD/VCD/CD) G When play is stopped and the disc has not been ejected, press RESUME. To cancel the resume mode G When play is stopped, press Ç again. Helpful Hints: ­ Open the disc tray or disconnect the DVD system from the power supply will cancel the resume option. ­ For VCD disc, pressing RESUME button will turn off the PBC mode and playback will start from the beginning. TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 19 001-035-MX2791B-00-Eng 19 9/16/04, 10:47 English Using the Disc Menu Basic playback controls Disc Operations Selecting various repeat functions Repeat play mode G While playing a disc, press REPEAT to select various repeat mode. "REPEAT" icon will appear on the display, except REPEAT OFF mode. Programme favourite tracks (audio CDs and VCDs) You can play the contents of the disc in the order you want by programming the order of the tracks to be played. Up to 99 tracks can be stored. English 1 Stop playback, then press PROG on the front panel to enter programme mode. DVD CHAPTER REPEAT ON TM TITLE REPEAT ON TM REPEAT-OFF 2 Use the numeric keypad (0-9) to enter a valid track number. "FULL" will appear if you have programmed 99 tracks. VCD/SVCD/CD REPEAT-ONE (repeat the current track) TM REPEAT-ALL TM REPEAT-OFF MP3 REPEAT-ONE TM REPEAT-ALBUM TM REPEAT-ALL TM REPEAT-OFF Helpful Hint: ­ For VCD, repeat playback is not possible if the PBC mode is switched on. 3 Press OK to store the track. 4 Repeat steps 2~3 to select other tracks. 5 Press ÉÅ to start programme playback. 6 Press Ç to stop playback or exit programme mode. Clearing the programme G Stop playback, then press the Ç again. If not, press DISC MENU on the remote. 2 Press 3 4 to select a picture file, then press 2 Playback will start automatically. 3 To quit simultaneous playback, press Ç. The picture and MP3 music playback will stop. Helpful Hint: ­ If the disc menu doesn't appear on the TV screen, press DISC MENU to turn on the disc menu. TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 21 001-035-MX2791B-00-Eng 21 9/16/04, 10:47 English Using the menu bar to programme 3 Use 1 2 3 4 keys to select a desired album, DVD Setup Menu Options Using the menu bar You can continue a number of operations directly via the multiple menu bars on the TV screen without interrupting the disc playback. The exception is when you enter (SETUP MENU), after which the playback will pause. SUBTITLE Select a subtitle language available on the DVD. AUDIO DVD : Select an audio soundtrack language available on the DVD. VCD : Select audio channels : LEFT VOCAL, RIGHT VOCAL, MONO LEFT, MONO RIGHT or STEREO. SLOW MOTION Select a slow playback speed. To resume normal playback, press ÉÅ. DVD : SF x1/2, SF x1/4, SF x1/8, SR x1/2, SR x1/4, SR x1/8, OFF. VCD : SF x1/1, SF x1/2, SF x1/3, OFF. (SF - Slow Forward, SR- Slow Rerverse) English DVD MENU , 1 In disc mode, press SYSTEM MENU. FAST REVERSE (FR) DVD / MP3 : FR x2, FR x4, FR x6, FR x8, OFF. VCD /CD : FR x1, FR x2, FR x3, FR x4, OFF. [. . . ] Each chapter is assigned a chapter number enabling you to locate the chapter you want. Component Video Out Jacks: Red, blue, and green jacks on the back of the DVD System that send high-quality video to a TV that has Component Video In jacks (R/G/B, Y/Pb/Pr, YUV, etc. ) Disc menu: A screen display prepared for allowing selection of images, sounds, subtitles, multi-angles, etc recorded on a DVD. Digital: Sound that has been converted into numerical values. Digital sound is available when you use the DIGITAL AUDIO OUT COAXIAL or OPTICAL jacks. [. . . ]