User manual PHILIPS MX5700D

[. . . ] DVD VIDEO DIGITAL SURROUND SYSTEM MX5700D 1 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Italia DICHIARAZIONE DI CONFORMITA' Si dichiara che l'apparecchio MX5700D, Philips risponde alle prescrizioni dell'art. Fatto a Eindhoven Philips Consumer Electronics Philips, Glaslaan 2 5616 JB Eindhoven, The Netherlands 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. [. . . ] Repeat steps 4~6 to select other discs and tracks. Press ÉÅ to start programme playback. Only the tracks programmed from audio CDs and VCDs will play. Press Ç to stop playback or exit programme mode. Notes: ­ Pressing OPEN·CLOSE button of the programmed disc tray will erase the programme. ­ If you do not press any buttons within 20 seconds, the system will exit programming mode. Using the menu bar to programme IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 19 "Setting the TV"). SYSTEM MENU 1 2, 3 4 STOP SEATING PREV OK PLAY/PAUSE DISC SKIP REPEAT REPEAT PROGRAM PROGRAM PROGRAM 1 2 3 4 5 6 DISC TRACK Clearing the programme G Stop playback, then press and hold Ç. PROG disappears from the display panel and "PROGRAM CLEARED" appears. Note: ­ If the DVD system is disconnected from the power supply, the programme will be erased. 1 2 3 Stop playback, then press SYSTEM MENU. The menu bar will appear across the top of the TV screen. Use the joystick (1 2) to select 4 to enter the programme menu. and press Use the joystick (1 2 3 4) to move within the programme menu and use the numeric keypad (0-9) to enter the disc and track number to be programmed. Press ÉÅ to start programme playback. Only the tracks programmed from audio CDs and VCDs will play. 4 G In stop mode, you can press PROG on the front panel to toggle between programme on and off. To clear the programme G Stop playback, then press and hold Ç. 25 Disc Operations Playing MP3/Picture disc (Kodak, JPEG) IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 19 "Setting the TV"). In stop mode, you can; G Use the joystick (1 2 3 4) on the remote to move within the menu and press OK to select the desired file to play. G In picture menu, you can use the joystick (1 2 3 4) to select S or T in the menu to view the previous/next page (if available). Notes: ­ Due to the recording nature of Digital Audio MP3 (DAM), only digital audio music will play. ­ It is normal to experience an occasional "skip" while listening to your MP3 discs. ­ Some files on Kodak or JPEG discs may be distorted during playback due to the configuration and characteristics of the disc. English 1 Load an MP3/Picture (Kodak, JPEG) disc. The disc reading time may exceed 30 seconds due to the complexity of the directory/file configuration. With picture discs, 9 thumbnail pictures will appear on the TV. [. . . ] The formats were developed by different companies. JPEG: A still-picture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio. MP3: A file format with a sound data compression system. "MP3" is the abbreviation of Motion Picture Experts Group 1 (or MPEG1) Audio Layer 3. [. . . ]