User manual PHILIPS MZ-5

[. . . ] Congratulations on purchasing this Philips product. We've included everything you need to get started. If you have any problems, Philips Representatives can help you get the most from your new product by explaining: · Do not attempt to return this product to the store. Return your Warranty Registration Card within 10 days Thank you for making Philips a part of your home! [. . . ] Repeats a track/ CD program/ entire CD; plays tracks in random order SOUND CONTROL ­ DBB: (Dynamic Bass Boost) enhances the bass; DSC: (Digital Sound Control) selects sound characteristics: 10 2TM, ¡1 or TUNING 3, 4 ­ CD: fast searches back and forward within a track; skips to subsequent/ beginning of a current track or previous track TUNER: (up, down) tunes to radio stations 5 mm (16-150 ) stereo headphone jack 12 AUX IN RIGHT/ LEFT ­ connects to the audio output of an additional appliance 13 SPEAKERS 8 ­ connects to the supplied speakers 14 AC MAINS ­ after all other connections have been made, connect the power plug to the wall outlet 15 FM AERIAL 75 ­ connects to the supplied antenna wire or an antenna wall connection 16 AM AERIAL ­ connects to the supplied AM frame antenna Y ­ switches the set to standby CD, TUNER, AUX, CDR ­ selects the respective sound source TIMER ­ activates and deactivates the timer SLEEP ­ activates and deactivates the sleeper time; selects sleeper time DBB (Dynamic Bass Boost) ­ enhances the bass DSC (Digital Sound Control) ­ selects sound characteristics: Display ­ shows the status of the set VOLUME ­ adjusts the volume level and sound settings; adjusts the hour and minutes for the clock/ timer functions OPEN/CLOSE ­ opens/ closes the CD tray 2; or PRESET 3 ­ starts and pauses CD playback; selects a preset tuner station (up); 9 or PRESET 4 ­ stops CD playback or erase a CD program; activates/ deactivates demo mode; selects a preset tuner station (down) SURR ­ creates a super-enhanced stereo effect MUTE ­ interrupts and resumes sound reproduction BAND ­ selects waveband VOLUME ­, + ­ adjusts volume level 2; ­ starts/ pauses CD playback ¡, TM ­ CD: skips to the beginning of a current track/ previous/ subsequent track; TUNER: (down, up) selects a preset radio station 9­ stops CD playback or erases a CD program 5, 6 ­ CD: searches backwards or forwards within a track/CD; TUNER: (down, up) tunes to radio stations REPEAT ­ repeats a track/ CD program/ entire CD SHUFFLE ­ plays CD tracks in random order PROGRAM­ CD: programs tracks and reviews the program; TUNER: programs radio stations or starts Auto programming Notes: Select the desired sound source first (e. CD CD R), then press the required function key (e. The CD function keys on the remote control can be used for a CD R. Do not expose the set, batteries, CDs or cassettes to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight. To clean the set, use a soft, slightly dampened chamois leather. Do not use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the housing. Open the battery compartment and insert two batteries, type AA, R06 or UM3 (preferably alkaline) with the correct polarity as indicated by the "+" and "­" symbols inside the compartment. Remove the batteries if they are exhausted or if the unit is not to be used for a long time. Make sure there is adequate ventilation to prevent the system from overheating. The mechanical parts of the set contain selflubricating bearings and must not be oiled or lubricated. When headphones are inserted into the headphone jack the speakers are disconnected. You can connect the audio left and right OUT terminals of another sound system, e. Use the MZ-5 sound controls to adjust the sound of the other system. Check if the power voltage, as shown on the type plate located on the bottom of the set, corresponds to your local power voltage. If it does not, consult your dealer or service center. If your set is equipped with a voltage selector on the bottom of the set, adjust the selector so that it matches with the local power voltage. Connect the power plug to the wall outlet and the set is now ready for use. To disconnect the set from the power completely, remove the plug from the wall outlet. Power-saving automatic standby As a power-saving feature, the unit automatically switches to standby if: ­ 15 minutes after a CD has reached the end and no control is operated. ­ after more than 24 hours no controls are operated. There are 3 ways to switch the set on: English ­ Playback will be continued without sound and the display shows MUTE. To activate sound reproduction you can: ­ press MUTE again; ­ adjust the volume controls; ­ change source. [. . . ] To take a CD out of its box, press the center spindle while lifting the CD. Always pick up the CD by the edge and return the CD to its box after use to avoid scratching and dust. To clean the CD, wipe in a straight line from the center towards the edge using a soft, lint-free cloth. Do not use cleaning agents as they may damage the disc. [. . . ]