User manual PHILIPS MZ-9

[. . . ] Repeat play Random play This product complies with the radio interference requirements of the European Community. Q Before operating the system, check that the operating voltage indicated on the typeplate (or the voltage indication beside the voltage selector) of your system is identical with the voltage of your local power supply. q Place the system on a flat , hard and stable surface. Q Place the system in a location with adequate ventilation to prevent internal heat build-up in your system. [. . . ] To select a desired track q Press S or T (í or ë) briefly and repeatedly until the desired track is displayed. q If playback is stopped , pressÉto start playback. To skip to the beginning of the current track during playback q Press S (í) once. Notes: ­ During programme play or shuffling mode, it is not possible to repeat playback the current disc (Repeat Disc mode). Up to 40 tracks can be stored in the memory in any order. Q Press STOP (Ç) once when playback is stopped or twice during playback. pROGRAM disappears and "PROGRAM CLEARED" is displayed. Note: ­ The programme will be erased when the system is disconnected from the power supply. If the disc tray is opened, the programmed tracks belonging to the outer two trays will be erased and the displayed will show "TRACKS CLEARED". The total number of tracks programmed and the total playing time are displayed. Notes: ­ If the total playing time is more than "99:59" or if one of the programmed tracks has a number greater than 30, then "--:--" is displayed instead of the total playing time. ­ If you attempt to programme more than 40 tracks, "FULL" is displayed. ­ If you press any of the CD DIRECT 1/2/3 buttons on the remote control, the system will play the selected disc or track, and the stored programme will be ignored temporarily. ­ During programming, if no button is pressed within 20 seconds, the system will exit the programme mode automatically. Press and hold S or T (à or á) until the frequency indication starts to change, then release. The display will show "SEARCH" until a radio station with sufficient signal strength is found. Repeat step 3 if necessary until you find the desired radio station. To begin automatic preset from a desired preset number q Switch on PRESET mode, then press 4 or 3 (í or ë) to select the desired preset number. If a radio station has been stored in one of the presets, it will not be stored again under another preset number. Q To tune to a weak station, press S or T (à or á) briefly and repeatedly until optimal reception found. The system will automatically store the radio stations with sufficient signal strength, starting from all RDS stations and followed by FM, MW and LW bands respectively. Weak RDS stations may be stored in later presets. [. . . ] ­ All the sound control features (Bass/Treble or Incredible Surround for example) are available for selection. Connect the audio out terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX/CDR IN terminals of your system. Cleaning the Cabinet q Use a soft cloth slightly moistened with a mild detergent solution. do not use a solution containing alcohol , spirits , ammonia or abrasives. [. . . ]