User manual PHILIPS OR 2200M

[. . . ] Always there to help you Register your product and get support at www. philips. com/welcome Question?Contact Philips OR2200 User manual Contents 1 Safety 2 Your clock radio 2 8 Listen to an external device 9 Use system menus 15 16 16 16 16 17 18 19 20 3 Introduction 3 What's in the box 3 Overview of the product 4 Know about the LCD display 5 6 6 6 6 7 8 9 9 9 9 9 10 10 10 10 10 10 11 11 12 12 12 12 12 13 13 Check the current software version Upgrade the software Reset the product 3 For the first time use 10 Adjust volume 11 Use the sleep timer 12 Use the countdown timer 13 Troubleshooting 14 Product information Assemble the AC power adaptor Connect power Power on Adjust brightness 4 Set time and date 5 Use the alarm timer Set an alarm Deactivate a preset alarm Snooze the alarm Stop the alarm 21 General information 21 Tuner 21 Speakers 21 21 Amplifier 22 Compliance 22 Care of the environment 22 Copyright 22 6 Listen to FM radio stations Switch to FM mode Search for a radio station automatically Search for a radio station manually Store radio stations automatically Program radio stations manually Display RDS information Adjust FM settings 15 Notice 7 Listen to DAB radio stations Switch to DAB mode For the first time use Tune to a stored radio station Program radio stations Display DAB information Use DAB menus EN 1 1 Safety Read and understand all instructions before you use this product. If damage is caused by failure to follow the instructions, the warranty does not apply. • Never remove the casing of the product. [. . . ] »» [Alarm 1] (or [Alarm 2]) is displayed with AL1 (or AL2) blinking. »» The current alarm time is displayed with hour digits blinking. Press / to set the hour, and then press to confirm. »» The minute digits begin to blink. Press / to set the minute, and then press to confirm. »» The alarm source name begins to blinks: [DAB], [FM], or [Buzzer]. Press / to select an alarm source, and then press to confirm. • If [DAB] or [Buzzer] is selected as the alarm source, press to select a preset radio station or the last listened station. »» The alarm frequency blinks: [Daily] (daily), [Weekdays] (weekdays), [Weekends] (weekends), or [Once] (once). Press / to select a frequency, and then press to confirm. »» The alarm volume level blinks. 2 3 4 Snooze the alarm When an alarm sounds, press SNOOZE. »» The alarm repeats after 9 minutes. Stop the alarm When the first (or second) alarm sounds, press AL1 (or AL2). »» The alarm stops and then repeats at the set time. 5 EN 9 6 Listen to FM radio stations Note adjust its position. •• You can store a maximum of 20 FM radio stations. Search for a radio station manually Press / repeatedly until the frequency of target radio station is displayed. •• For optimal reception, fully extend the antenna and Store radio stations automatically Press and hold until [Auto] is displayed. »» After the search is complete, the first stored radio station is broadcast. • To tune to a stored radio station, press PRESET to access the list of stored radio stations, and then press / repeatedly. Switch to FM mode Program radio stations manually Press SOURCE repeatedly until [FM Mode] is displayed. »» The current frequency is displayed. 1 2 3 4 5 • Tune to a radio station. Press and hold PRESET until [Preset store] is displayed. Press / repeatedly to select a preset sequence number. »» The radio station is stored with the selected sequence number. Repeat steps 1-4 to program more radio stations. To tune to a stored radio station, press PRESET to access the list of stored radio stations, and then press / repeatedly. Note Search for a radio station automatically Press and hold / until [Scanning. . . ] is displayed. [. . . ] • To stop the buzzer, press TIMER or the power and volume knob. EN 19 13 Troubleshooting Warning •• Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this product, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. When you contact Philips, make sure that the product is nearby and the model number and serial number are available. [. . . ]