User manual PHILIPS PERFECT CARE GC9245/02

[. . . ] Register your product and get support at www. νικα 34 Español 44 Suomi 54 Français 63 Italiano 73 Nederlands 83 Norsk 93 Português 102 Svenska 112 Türkçe 121 GC9500, GC9200 series 6 English Introduction We all know the fuss with traditional irons: choosing the right temperature for your jeans and delicate fabrics, waiting for the iron to warm up and cool down. Many of us have ruined clothes with an iron that was too hot for the job. Those disasters are a thing of the past with the new Philips PerfectCare. [. . . ] , , The ‘iron ready’ light flashes to indicate that the steam generator is heating up. , , When the steam generator is ready for use, the ‘iron ready’ light lights up continuously. 10 English 4 Specific types only: Press the carry lock release button to unlock the iron from the iron platform. 5 Press and hold the steam trigger to start steam ironing. Steam boost function You can use the steam boost function to remove stubborn creases. Note: Some water droplets may come out of the soleplate when you use the steam boost function for the first time. This stops after you have used the steam boost function for some time.   Vertical steam ironing Hot steam is emitted from the iron. Never attempt to remove creases from a garment that is worn. Do not apply steam near your or someone else’s hand. 1 Hang the garment on a clothes hanger and pull the garment tight with one hand. 2 Hold the iron in vertical position with the other hand and press the steam trigger to steam the garment. 3 Touch the garment lightly with the soleplate of the iron to remove creases. 4 Use the steam boost button together with the steam trigger to successfully remove stubborn creases. ECO mode (specific types only) During ironing you can use the ECO mode to save energy, yet achieving sufficient steamflow to iron all your garments. Note: For the best results, we recommend you to use the ‘Optimal Temp’ setting. English 1 Press the on/off button for 2 seconds for the light to turn green. 11 2 To switch back to ‘Optimal Temp’ setting switch off and turn on the steam generator again. AUTO OFF/ECO mode To save energy, the steam generator switches off automatically when it has not been used for 10 minutes and the auto-off light in the on/off button starts to flash. To activate the steam generator again, press any button on the steam generator. The steam generator starts to heat up again. Cleaning and maintenance Descaling the steam generator with the EASY DE-CALC knob To prevent scale build-up inside the steam generator and to ensure longlasting steaming performance,  this steam generator has a DE-CALC light on the control panel. [. . . ] The auto-off function/ECO mode is activated automatically when the steam generator has not been used for more than 10 minutes. The steam generator Water is pumped into the boiler produces a pumping inside the steam generator. If the pumping sound continues nonstop, switch off the steam generator and remove the plug from the wall socket. €1) 1 Dampslange 2 Holder til strygejern 3 Opbevaringsrum til dampslange 4 Rum til ledningsopbevaring 5 Netledning med stik  6 Lysindikator for “Tom vandtank” 7 Tænd/sluk-knap med strømsparetilstand 8 DE-CALC-nulstillingsknap med lys 9 EASY DE-CALC-knap 10 Vandstandsindikator 11 Aftagelig vandtank 12 Påfyldningshul 13 Udløserknap til transportlås 14 Lås til transport 15 Strygesål 16 Lysindikator for “strygejernet er klar” 17 Dampudløser 18 Knap til dampskud 16 Dansk Vigtigt Læs denne brugsvejledning omhyggeligt igennem, inden apparatet tages i brug, og gem den til eventuelt senere brug. [. . . ]