User manual PHILIPS PERSONAL CD PLAYER AX3217-17B

[. . . ] Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Only use attachments/accessories specified by the manufacturer. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. [. . . ] volume down 9 ···· 2 . . . . . . . . . . . . . . opens the CD lid 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . type plate Supplied Accessories: 1 x headphones, HE545 or HE570 2 x rechargeable batteries, AY3364 1 x external battery case, AY3380 1 x remote control, AY3774 1 x headphone jack adapter (for some versions only) 1 x AC/ DC adapter, AY3170 Notes:­ If there is no activity, the set will automatically switch off after a while to save energy. ­ Use the buttons on the set to operate if you have connected the headphones with the headphone jack adapter. 0 2 2 Clip REMOTE CONTROL AY3774 CONTROLS (see figure 2) 1 p . . . . . . . . . . . . . . . . . . . . . . . . . . 3. 5 mm headphone jack 3 HOLD . . . . . . . . . . . . . . . . . . . . locks all buttons 4 VOLUME (3 , 4) adjusts the volume 2;. . . . . . . . . . . . . . . . . . . . . . . . switches the set on, starts playback and interrupts playback / §. . . . . . . . . . . . . . . . . skips and searches CD tracks backwards / forwards 59 stops playback and switches the set off 6 DBB . . . . . . . . . . . . . . . . . . . . . . switches the bass enhancement on and off 7 PROG . . . . . . . . . . . . . . . . . . . . programs tracks and review the program 8 MODE. . . . . . . . . . . . . . . . . . . selects the different playing possibilities 9 Display Using the remote control The remote control allows you to command all the functions on the player. With HOLD activated, you can avoid accidental activation of other functions. 1 Switch the slider to HOLD to activate HOLD. HoLd is shown when you press any button on the set. If the set is switched off, HoLd will be shown only when 2; is pressed on the set. 2 To deactivate HOLD, switch the slider to OFF. Note: For convenience, the remote control buttons override the HOLD function on the set. PROGRAMMING TRACK NUMBERS (remote control only) You can store up to 30 tracks to play in a program. A single track may be stored more than once in the program. 1 While playback is stopped, select a track with or §. yprog lights up; the track number programmed and P with the total number of stored tracks are displayed. 3 Select and store all desired tracks in this way. 4 Press 2; to start playback of your selected tracks. [. . . ] Motor noise may increase when the rate changes. If the noise bothers you, use the AC/DC adapter to power the player. The motor rotation rate does not change when operating on AC power. Handling instructions · Recharging already charged or half-charged batteries will shorten their lifetime. We therefore recommend that you let the rechargeable ECO-PLUS NiMH battery run till it is completely empty before you recharge it. [. . . ]