User manual PHILIPS PET1000

[. . . ] PET1000_ENG. QXD 4/11/05 10:07 AM Page 1 user manual manuel d'utilisation | manual del usuario | benutzerhandbuch Portable DVD Player PET1000_ENG. QXD 4/11/05 10:07 AM Page 2 Important notes for users in the UK Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. or BSI approved type. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. [. . . ] Some DVD discs however are produced in a way that requires specific operation or allows only limited operation during playback. In these cases the player may not respond to all operating commands. When this occurs, please refer to the instructions in the disc inlay. When a appears on the screen, the operation is not permitted by the player or the disc. English About this manual Remote control operation · Unless otherwise stated, all operations can be carried out with the remote control. Always point the remote control directly at the player, making sure there are no obstructions in the path of the infrared beam. · When there are corresponding keys on the main unit, they can also be used. Menu navigation · Your player has an intuitive menu navigation system to guide you through various settings and operations. · Use the function keys to activate / disable relevant operations. · Use 3, 4, 1, 2 to browse through menus. · Press OK key to confirm your selection. 15 PET1000_ENG. QXD 4/11/05 10:07 AM Page 16 Basic functions Switching on for OSD language setup English is the default language of your player's on screen display. You may choose to use English, French, Spanish, German, Simplified Chinese or Traditional Chinese for your player's on screen display. Countries European American Asia Pacific OSD Language Options English, French, Spanish, German English, French, Spanish English, Tradtional Chinese, Simplified Chinese English 16 1 Slide the POWER switch to ON to switch on the player. 4 Scroll and select OSD LANG and press 2 to select from OSD language options. 5 Select your preferred language and press OK. Loading discs and switching on 1 Press OPEN to open the disc door. 2 Insert your chosen disc, label side up (also when a double sided DVD disc is inserted). Make sure it is sitting properly in the correct recess. 4 Slide the POWER switch to ON to switch on the player. TIP · A normal mechanical noise is heard during playback. PET1000_ENG. QXD 4/11/05 10:07 AM Page 17 After switching on, inserting the disc and closing the door, playback starts automatically. The screen shows the type of disc loaded. The disc may invite you to select an item from a menu. Use the 3, 4, 1, 2 keys to highlight your selection, and press OK. Note: Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and discs can have an optional region code. If you load a disc of a different region code to your player, you will see the region code notice on the screen. The disc will not play, and should be unloaded. Playing an audio or video CD disc · After switching on, inserting the disc and closing the door, the screen shows the type of disc loaded as well as information about the disc's contents. · While playing VCD with MTV/Karaoke, press number keys(0-9) to select the track and press 2 or OK to play the track. Press RETURN to go back to menu of the selection. Playing DivX® disc · Philips provide you the DivX VOD(Video on Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more information, visit www. divx. com/vod. [. . . ] 5 Press OSD to exit. PET1000_ENG. QXD 4/11/05 10:07 AM Page 24 SETUP operations To maximize your playback experience, use SETUP to fine tune your settings. Use the 3, 4, 1, 2 keys to highlight your selection, and press OK. 2 Use the 3 4 keys to highlight your selection. When the cursor highlights these settings, press OK to: GENERAL SETUP AUDIO SETUP PREFERENCES PASSWORD SETUP select display and other options select audio options select playback preferences select password options English 24 3 Press 1 to abort current setting or go back to previous menu level. [. . . ]